bushwhacker Posted June 21, 2008 Share Posted June 21, 2008 Has anyone done a removal of the old tank and re-fit of a new tank on a 1986 110 csw. Mine is not leaking but it has taken a fair old battering. I was thinkng of doing this and any helpful suggestions would be very much appreciated, IE what should be taken of first and so on. Many thanks Mark Quote Link to comment Share on other sites More sharing options...
western Posted June 21, 2008 Share Posted June 21, 2008 drain the tank remove the sender unit remove the rubber pipe to filler cap/neck if fitted remove the 2 tow hitch chassis brace bars disconnect all the fuel lines at the tank support with a trolley jack or helper undo the 4 bolts [2 front] & [2 rear] lower the tank to the floor. hth Quote Link to comment Share on other sites More sharing options...
bushwhacker Posted June 21, 2008 Author Share Posted June 21, 2008 Excellent Thanks Quote Link to comment Share on other sites More sharing options...
Les Henson Posted June 22, 2008 Share Posted June 22, 2008 Have a look at this thread - you even get pictures http://forums.lr4x4.com/index.php?showtopic=24885 Les. Quote Link to comment Share on other sites More sharing options...
Mo Murphy Posted June 22, 2008 Share Posted June 22, 2008 Is Les the missing link ? Mo Quote Link to comment Share on other sites More sharing options...
Les Henson Posted June 22, 2008 Share Posted June 22, 2008 Edited now - that'll teach me to go out until the small hours on the razz Les. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.