jimmy_neutron Posted March 20, 2009 Share Posted March 20, 2009 Got a cheapo lift pump for a 200tdi just before xmas cos thats all i could get in a hurry. Its died already, so what i want to know is where to get a good lift pump cheap and what make to look for/ not to get . TA Quote Link to comment Share on other sites More sharing options...
Les Henson Posted March 20, 2009 Share Posted March 20, 2009 Steer clear of any 'white box' (unbranded), or Britpart ones. Most other makes are quite good. Of course - genuine is always preferable if you are prepared to pay the extra. Les. Quote Link to comment Share on other sites More sharing options...
western Posted March 20, 2009 Share Posted March 20, 2009 the current one on my engine came from Allmakes via my local LR parts supplier, it's been fine so far. Quote Link to comment Share on other sites More sharing options...
bobrick Posted March 20, 2009 Share Posted March 20, 2009 the current one on my engine came from Allmakes via my local LR parts supplier, it's been fine so far. ralph, where do you get your parts from round here Quote Link to comment Share on other sites More sharing options...
western Posted March 20, 2009 Share Posted March 20, 2009 ralph, where do you get your parts from round here From LRP very fair prices & superb service. I very rarely use any other place. Quote Link to comment Share on other sites More sharing options...
02jcole Posted March 21, 2009 Share Posted March 21, 2009 Hello, I have just fitted one of these after my old unit failed: Visit My Website Very good quality, fast delivery and service, and comes with replacement olives, gasket and nuts, so you don't have to hack the nuts off your old pump. James. Quote Link to comment Share on other sites More sharing options...
jimmy_neutron Posted March 22, 2009 Author Share Posted March 22, 2009 Just ordered a genuine land rover one as i found that lrseries.com were selling them for £45. Bit more to pay but my van has gotta work. After reading another thread it made me realise that if this doesn't work then it may be drawing in air. I run from dual tanks and have the option to switch between both and both tanks seem to have the same problem so that seems to eliminate most of the pipework and back to the lift pump but time will tell. Thanks to all that answered. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.