bmhor Posted March 2, 2010 Share Posted March 2, 2010 OK the question is: How can you "turn on" the injector pump on a 300tdi that has the black plastic box instead of the fuel shut off solenoid? I've just bought a 3dr disco for spares but someone had made off with the multifunction box that I'm guessing controls this. FYI is an R plate. Bob Quote Link to comment Share on other sites More sharing options...
BogMonster Posted March 2, 2010 Share Posted March 2, 2010 If it is an EDC pump then you are probably a bit buggered. Got a photo? Quote Link to comment Share on other sites More sharing options...
western Posted March 2, 2010 Share Posted March 2, 2010 Hello Bob don't think a EDC FIP can be played with, it looks quite different to a normal Tdi FIP [EDC pump below] Quote Link to comment Share on other sites More sharing options...
bmhor Posted March 2, 2010 Author Share Posted March 2, 2010 Well the good news is that it does not look like an EDC pump. I thought is was just a normal one until I went to power the shut off solenoid. There is just a black box on the end of the pump with 3 wires going into it. I've tried providing power and earth to this in a variety of combinations but no joy. Bob Quote Link to comment Share on other sites More sharing options...
maxtherotti Posted March 2, 2010 Share Posted March 2, 2010 thats a ddis immobiliser box (and its poo) carefully break that off with a gentle hammer and chisel (it has break off security bolts fitted holding it on with a bar behind the solenoid) then connect the centre wire to the top of the solenoid (after you have fitted a ring connector) thats under it jobs a good one rob Quote Link to comment Share on other sites More sharing options...
bmhor Posted March 2, 2010 Author Share Posted March 2, 2010 thats a ddis immobiliser box (and its poo) carefully break that off with a gentle hammer and chisel (it has break off security bolts fitted holding it on with a bar behind the solenoid) then connect the centre wire to the top of the solenoid (after you have fitted a ring connector) thats under it jobs a good one rob Rob, You are a star! I should have known, Land Rovers and hammers go together.. Thanks again guys for your help, I'll get hammering in the morning. Bob Quote Link to comment Share on other sites More sharing options...
maxtherotti Posted March 2, 2010 Share Posted March 2, 2010 no probs chap i 'removed' mine after it stopped it starting a few times there have been a few threads on the ddis set up and general concensus is its a touch unreliable just to note your car wont have a spider for the imobiliser as the box on the pump does it let us know how you get on Rob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.