PieEater3142 Posted February 13, 2011 Share Posted February 13, 2011 Hi guys, So, I have just got round to trying to mount the tub after sanding it all down etc. As this is an adopted project there are a few bits and pieces I have been trying to identify. Having looked at the microfiche for the 110 and dug around on the interweb for a bit it seems that I have 110 CSW mounts, not 110 pick up mounts. Could be the reason why I can't for the life of me get the tub to line up properly.... Anyway, dug around and I'm fairly sure I need NRC7053 brackets, not what I assume are NRC5665 brackets. Can someone please confirm for me if my assumptions are correct and that I do indeed need to get 4xNRC7053? Also just to check, the microfiche also says there are different mounts again for a chassis cab. Can anyone explain what a chassis cab is? Pretty sure I have a pick up but just to be on the safe side... (excuse my ignorance). I currently have four of the brackets shown which I assume are the NRC5665 - can anyone confirm that these are indeed the CSW mounts? Thanks in advance, James Quote Link to comment Share on other sites More sharing options...
PieEater3142 Posted February 13, 2011 Author Share Posted February 13, 2011 Also on a side note, Can anyone help me regarding the rear brackets for mounting the tub. I have a 200tdi tub and a td5 chassis. I would assume that the brackets for mounting the tub on the back of a 110 would be the same as those for a 90, certainly the tub appears to have the same holes to accept similar brackets. However the chassis holes do not seem to line up on the td5 chassis. Does anyone know what brackets should be used for mounting a rear tub on a 110 pick up (200tdi tub to td5 chassis). I have attached pics of the back, hopefully these are visible enough to see the disparity in mount points. Thanks in advance, James Quote Link to comment Share on other sites More sharing options...
western Posted February 13, 2011 Share Posted February 13, 2011 chassis cab = vehicle complete with cab but no rear load carrying body, Td5 has a seperate attachment part for the rear end of the rear body. Quote Link to comment Share on other sites More sharing options...
need4speed Posted February 13, 2011 Share Posted February 13, 2011 As Ralph says above. However I'm slightly more concerned about the rear attachments. Yes the td5 has a separate piece but you will need to raise the rear of the tub to fit it I think. Quote Link to comment Share on other sites More sharing options...
western Posted February 13, 2011 Share Posted February 13, 2011 NRC6951 & & here x 2 body mounting inner & NRC7053 x 4 body mounting outer for your rear body. body attachment to rear cross mamber top face see this thread http://forums.lr4x4.com/index.php?showtopic=53122 the NRC5665 are 110CSW brackets Quote Link to comment Share on other sites More sharing options...
PieEater3142 Posted February 13, 2011 Author Share Posted February 13, 2011 Awesome responses thanks guys. Western, do you happen to know which of the body mounting brackets I need, you say 2 inner and 4 outer, where do they all go. I thought there was only 4 in total. Sorry to be so dense but first project and also my first ever 110. Only had 90's before. Cheers, James Quote Link to comment Share on other sites More sharing options...
western Posted February 13, 2011 Share Posted February 13, 2011 without looking at a 110 hadrtop, I can't say, on my CSW 2 brackets hit the top outer ends outriggers about halfway along the chassis, I believe 2 are at the front end of the rear body on yours. Quote Link to comment Share on other sites More sharing options...
need4speed Posted February 13, 2011 Share Posted February 13, 2011 You can get away with using 2 brackets but I'm using 4 on my build. 2 on each outrigger. Quote Link to comment Share on other sites More sharing options...
PieEater3142 Posted February 13, 2011 Author Share Posted February 13, 2011 Just about to order the parts to mount the tub. Thanks for all the help. Just to confirm, it's 4x NRC7053? Quote Link to comment Share on other sites More sharing options...
western Posted February 13, 2011 Share Posted February 13, 2011 Yep, that's what the parts book says. Quote Link to comment Share on other sites More sharing options...
PieEater3142 Posted February 13, 2011 Author Share Posted February 13, 2011 Awesome, thanks so much for your help with this. Btw need4speed - loving the rebuild - very useful to see someone else with a chassis stripped (but with the mounts I need already on there). Quote Link to comment Share on other sites More sharing options...
Drizz Posted March 17, 2012 Share Posted March 17, 2012 The NRC7053 seem to be what i need for a 110 Van. Can anyone confirm this? Quote Link to comment Share on other sites More sharing options...
western Posted March 17, 2012 Share Posted March 17, 2012 The NRC7053 seem to be what i need for a 110 Van. Can anyone confirm this? http://www.brit-car.co.uk/product.php?xProd=126417 http://www.thexmod.com/item_detail.asp?id=1014 NRC7053 for pick up & hardtop [van] rear body to chassis. Quote Link to comment Share on other sites More sharing options...
mike4444244 Posted March 17, 2012 Share Posted March 17, 2012 Have you ordered them? I have just converted mine to a 5 door from a 3 door, and have 4 of those brackets spare ( i assume they are the same as the HT ones) If you want me to post them? We could have swapped, bloody typical after ordering a new set lol! Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.