Maverik Posted October 8, 2011 Share Posted October 8, 2011 I'm fitting up a Thermotop C in my LR90 at the moment and was looking at the pipework today for the water, could be a ball ache making something up so was wondering if there was any "standard" pipework...? Anyone know any parts numbers etc? Cheers Mav Quote Link to comment Share on other sites More sharing options...
western Posted October 8, 2011 Share Posted October 8, 2011 reckon your on your own, unless others who have one fitted can help, nothing for a 90 or 110 in the parts info I have access too. this page for a Rover 75 car http://www.numcat.ru/mgrover/p/71/61045/ Quote Link to comment Share on other sites More sharing options...
Retroanaconda Posted October 8, 2011 Share Posted October 8, 2011 I think most people just get some 5/8" ID heater hose and plumb it into that circuit. Quote Link to comment Share on other sites More sharing options...
Maverik Posted October 10, 2011 Author Share Posted October 10, 2011 Thanks chaps. I wondered if that was the case. I've got the hose but the problem is although it is quite a simple plum in... there a couple of intresting angles to get the hose round. I picked up some 19mm 90 deg elbows from B&Q meant to be for fish tanks evidently, they're not pretty but should do the job. - if they can hold up to the normal operating temp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.