ROGUE TROOPER Posted August 11, 2006 Share Posted August 11, 2006 How do they fit, and can someone take some pictures please I know I need sill gussets part # 345100 & 345101, but where does the belt attach too? Ta muchly Quote Link to comment Share on other sites More sharing options...
minivin Posted August 11, 2006 Share Posted August 11, 2006 All I got is this piccie of the sill mount bracket and the belt attached, feel free to crawl over the truck on Sunday when you pop around! Quote Link to comment Share on other sites More sharing options...
GBMUD Posted August 12, 2006 Share Posted August 12, 2006 So how are you wearing that seatbelt Rob? It is suposed to go over both shoulders you know. Chris Quote Link to comment Share on other sites More sharing options...
minivin Posted August 12, 2006 Share Posted August 12, 2006 So how are you wearing that seatbelt Rob? It is suposed to go over both shoulders you know. Chris It does, honest, I'll get Rogue to strap me up and take pictures tomorrow Quote Link to comment Share on other sites More sharing options...
ROGUE TROOPER Posted August 12, 2006 Author Share Posted August 12, 2006 oooerrr shall I bring the Cream? Quote Link to comment Share on other sites More sharing options...
minivin Posted August 12, 2006 Share Posted August 12, 2006 Don't think Brilcream has the right viscous qualities Just fitted my PAS ram and then noticed I can't fit my 525 as the ram gets in the way doh! Quote Link to comment Share on other sites More sharing options...
ROGUE TROOPER Posted August 12, 2006 Author Share Posted August 12, 2006 Try a 524!! Quote Link to comment Share on other sites More sharing options...
minivin Posted August 12, 2006 Share Posted August 12, 2006 Try a 524!! Knew I was doing something wrong! does it come in orange? Quote Link to comment Share on other sites More sharing options...
steve_a Posted August 12, 2006 Share Posted August 12, 2006 When I fitted some retracatbles to my S3 truck cab I put the roll bit in the uprights and fitted the rest to the place where the static belt already attached. Some pictures if it helps, not very good quality and I only have them on the server as it was some time ago. Once fitted the belts did pass an MOT in two different garages. this is probably the best picture. you have to cut out a bit of the bracket so the roll up bit can poke through, a bit of gentle drilling for the nut as well. hardest bit is poking the nut up behind the bracket and getting the bolt in, pretty fiddly but doable. Quote Link to comment Share on other sites More sharing options...
simonb Posted August 13, 2006 Share Posted August 13, 2006 Hmph, mr adams i'll think you'll find the top 2 pics are MY series 3, recognise those rust stains anywhere, not to mention its taken at my dads The bottom pics are ur series... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.