Defender_300Tdi Posted April 17, 2012 Share Posted April 17, 2012 Hi I am sure this has been asked before but can I used Part No. UQB000130G (130 Clutch Pressure Plate) with the normal 300Tdi Defender Clutch Cover Plate (URB100760G)? Or did Land Rover use an uprated Cover Plate as well and if so what part number is this? I only ask because I have replaced the clutch and cover plate with a standard 110 item, however I am planning on tuning the engine and adding a bit of weight to the vehicle so would prefer the 130 HD Clutch and uprated cover plate if I need it. If I dont then I can save myself the cost of a cover plate! Regards Rob Quote Link to comment Share on other sites More sharing options...
vulcan bomber Posted April 17, 2012 Share Posted April 17, 2012 cover plates are common to both clutch friction plates Quote Link to comment Share on other sites More sharing options...
miketomcat Posted April 17, 2012 Share Posted April 17, 2012 The friction plate is the only difference between 110 and 130 clutch the 130's is a little larger in diameter. Mike Quote Link to comment Share on other sites More sharing options...
western Posted April 17, 2012 Share Posted April 17, 2012 & has 8 damper springs instead of 6 in the standard 110 plate. Quote Link to comment Share on other sites More sharing options...
Defender_300Tdi Posted April 17, 2012 Author Share Posted April 17, 2012 Thanks chaps as always! I will be putting in an order then for the HD 130 clutch plate then. Incidently, Valeo would be a good choice? At around 55 pounds? Cheers Rob Quote Link to comment Share on other sites More sharing options...
vulcan bomber Posted April 18, 2012 Share Posted April 18, 2012 valeo is the OEM.. Making them a good choice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.