airportable Posted January 3, 2013 Share Posted January 3, 2013 Hi Do any one know if it is possible to fit a disco 1 dash on à rrc? I am thinking of body swap on My disco 300tdi and like to put à rrc body on it. But do the dash fit the rrc body ? Have any one tested this before? Thanks. Quote Link to comment Share on other sites More sharing options...
simonr Posted January 3, 2013 Share Posted January 3, 2013 I've heard of this being done - though have no experience personally. I would therefore conclude it is at least possible - though undoubtedly it will require a fair bit of fettling! A P38 dash will apparently fit fairly easily - though that doesn't help you much! Do it - it's a good project! Si Quote Link to comment Share on other sites More sharing options...
Rob_B Posted January 3, 2013 Share Posted January 3, 2013 Looks like it is possible. http://forums.lr4x4.com/index.php?showtopic=41433 Quote Link to comment Share on other sites More sharing options...
airportable Posted January 4, 2013 Author Share Posted January 4, 2013 Ok That looks great Many thanks. Now I know What to do. Rrc disco dash. :-) Quote Link to comment Share on other sites More sharing options...
Rob_B Posted January 4, 2013 Share Posted January 4, 2013 I like the idea. My friend is going to scrap a Disco and the dash in my RRC isn't complete and a big mess at the moment. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.