Snagger Posted December 10, 2013 Share Posted December 10, 2013 Hi folks, I'm after a little advice from TDCI drivers, here. I have just had to replace a complete indicator lamp unit because a small chip in the top of the lens allowed water to enter, eventually filling the unit and corroding the contacts on the bulb holder (apparently, these newer lamps seal much better than the older type with separate lenses!). When testing the indicators after this work, I noticed the trailer warning light at the bottom of the dash flashes momentarily on the first flash of the indicators in either direction. I hadn't noticed this before; is it normal? Quote Link to comment Share on other sites More sharing options...
Retroanaconda Posted December 10, 2013 Share Posted December 10, 2013 Yep. Quote Link to comment Share on other sites More sharing options...
Puffernutter Posted December 10, 2013 Share Posted December 10, 2013 It always did on my 110 Cheers Peter Quote Link to comment Share on other sites More sharing options...
western Posted December 10, 2013 Share Posted December 10, 2013 normal, my '89 110 does exactly the same. Quote Link to comment Share on other sites More sharing options...
Snagger Posted December 11, 2013 Author Share Posted December 11, 2013 Thanks fellas. One less worry... Quote Link to comment Share on other sites More sharing options...
western Posted December 11, 2013 Share Posted December 11, 2013 with a trailer or trailer light board plugged in, the trailer indicator light should flash in unison with the vehicle indicators, with hazard lights on regardless of trailer on or no trailer, it might flash in unison with the hazard lights [ it does on pre tdci vehicles] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.