tomcat404 Posted October 12, 2014 Share Posted October 12, 2014 Evening all, just been looking at mike ibex build and came across a bit of kit ive been after for ages , picture below. I need to bend 5mm x 100mm bars of steel at 45deg for inner link mounts.. Ive been after this tooling for ages and haved missed one set on ebay so far.. anybody have any ideas where i can get a set from please? Quote Link to comment Share on other sites More sharing options...
miketomcat Posted October 12, 2014 Share Posted October 12, 2014 I've just replied on my thread to tell you how to make it. The v block in the picture is only the two bits of plate that came with the press used for support when pushing bushes out. Mike Quote Link to comment Share on other sites More sharing options...
elbekko Posted October 13, 2014 Share Posted October 13, 2014 http://www.pirate4x4.com/forum/tools-supplies/867375-20-ton-press-brake-diy-builder-kit-swag-off-road.html Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted October 14, 2014 Share Posted October 14, 2014 Don't know if these are any use but I saw them in a catalogue; (read the small print if your thinking of bidding) http://www.bidspotter.co.uk/en-gb/auction-catalogues/home-bpi/catalogue-id-home-a10078/lot-fd0cb76e-ee68-4d94-ad2f-a3b300ba200f http://www.bidspotter.co.uk/en-gb/auction-catalogues/home-bpi/catalogue-id-home-a10078/lot-4a22e417-63d0-4ec0-b6ff-a3b300ba200f http://www.bidspotter.co.uk/en-gb/auction-catalogues/home-bpi/catalogue-id-home-a10078/lot-a538b4ae-24ef-492f-8825-a3b300ba2014 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.