Cynic-al Posted January 12, 2015 Share Posted January 12, 2015 I've bought a new drill, all the others I've used have had a chart giving rough spindle speed rpm by drill diameter and material under the belt cover but this one doesn't. Does anyone have one I can print to stick on the wall? It would be easier than me doing a spreadsheet Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted January 12, 2015 Share Posted January 12, 2015 There's loads on Google images, but here seems an appropriate one, maybe? Quote Link to comment Share on other sites More sharing options...
CwazyWabbit Posted January 12, 2015 Share Posted January 12, 2015 Handy, might stick that to my Meddings Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted January 12, 2015 Author Share Posted January 12, 2015 The ones I found were imperial and were cluttered with feed rate which I don't need. The chart linked above that bowie69 linked is perfect although feels really fast to me for HSS bits? Or maybe I'm just a coward Thanks 1 Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted January 12, 2015 Share Posted January 12, 2015 Nah, I'm a coward too, tend to use nice slow speeds once I get to 10mm plus Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.