muddy4x4xfar Posted January 6, 2016 Share Posted January 6, 2016 hi all , does anyone know where i can get a simple to understand wiring diagram for a discovery 1 200tdi? long story as to why i need one, any help much appreciated regards chris Quote Link to comment Share on other sites More sharing options...
miketomcat Posted January 6, 2016 Share Posted January 6, 2016 The Haynes one is simple but it is in circuits so makes it difficult to tie in together. The land rover one is more comprehensive but similar. It might be better to try to describe what you need. Mike Quote Link to comment Share on other sites More sharing options...
Nigelw Posted January 7, 2016 Share Posted January 7, 2016 Exactly as Mike says, Haynes is easiest, I redid a lot of mine with help of the Haynes manual. Quote Link to comment Share on other sites More sharing options...
muddy4x4xfar Posted January 7, 2016 Author Share Posted January 7, 2016 I have the haynes manual. Just seemed to baffel my head. Plus a lot of signs im not formiliar with. Unless im too used to looking at discovery td5 diagrams ? Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted January 7, 2016 Share Posted January 7, 2016 There's a key at the beginning of the section. Quote Link to comment Share on other sites More sharing options...
Nigelw Posted January 8, 2016 Share Posted January 8, 2016 What do you want to do? I know most of my loom off the top of my head Quote Link to comment Share on other sites More sharing options...
muddy4x4xfar Posted January 8, 2016 Author Share Posted January 8, 2016 Im building a discovery 1 with a ls3 v8 engine. But most of the stuff i want is what a discovery 2 wiring loom has so im fitting a discovery2 wiring loom but for things such as the heater ill need to keep that wiring in hence why id need the diagram. Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted January 8, 2016 Share Posted January 8, 2016 Sounds like you are making a right headache for yourself! What exactly does a D2 loom have that you need over a D1 loom? Quote Link to comment Share on other sites More sharing options...
muddy4x4xfar Posted January 8, 2016 Author Share Posted January 8, 2016 its complicated to explain, I'm taking the little bits i need from the disco 1 loom i.e the heater wiring so that will work and fitting a disco 2 wiring loom as it has folding mirrors heated screen, heated seats etc etc, but i want to make sure I'm taking the right bits off. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.