del

Iam looking for this part its a air pipe and the number is spx 119 , does anyone know what its from and how much is it ,I would go and ask at my local main stealer but the branch shut down last year,cheers del

Is it posible to use standard intercooler pipes and adapt them to fit a 200tdi into a 1988 90? Ivw picked up a few old disco pipes at billing today and a guy was telling me to use the 200 tdi bottom intercooler pipe and the 300tdi top pipe and with adaption they should work does that sound right? they were only a couple of quid so I thought it might be worth a punt

How much would a garage charge to fit a clutch fork on a 1988 90 , how long does it take?

hi all, just had the master cylinder changed on saturday -which was fine until tuesday the clutch seized on the M1 at 7.00 in the morning middle lane in heavy traffic , took it back to the garage with the help of the rac and was told the clutch fork needed changing , when you change the master cylinder does that put pressure on the rest of the system?

that would be good my email adress is delfletcher@ntlworld.com, I was thinking that maybe snorkle air pipes might work ,but I think you way sounds easier,cheers del

just want to pick your brains, the air box conversion that steve parker sells is a bit expensive at £230 , I was looking at one and it seems to be cobbled together from landrover parts. The air box has a part number esr 2102 and the large pipe that has smaller pipe merging into it is numbered spx 119 ..,what are they off ? where can i get them from? has anyone tried to do the air box conversion this way?

I bought a nos lining from billing the other year , it was dusty, i washed it with soapy water and the fabric detached fron the moulded lid ,

cheers

hi all got clutch fluid dripping down the clutch pedal, js that a knackered master cylinder because the clutch seems to be working ok?

so in a nut shell the thin spacers on ebay will do the job ?

I wasnt really worried about fitting the center caps but I saw someone selling 4mm spacers on ebay for £16 (for four) and I thought that might be a cheap fix for the poor fitting problem

thats a bit worrying!!

Ive got a 1988 90 and I have put on a set of disco alloys , what size wheel spacers would I need so that I can fit the center plastic trims? It has the drum brakes on the rear, and when I got the alloy fitted by a trye company they didnt fit one of the rear wheels flat on the hub and I had people flashing me as the alloy was ovulating, someone told me that that disco wheels are quite a precise is that true as there is someone slling 4mm spacers on ebay and I know this wont allow me to fit the center caps but I thought it may stop that problem happening again, any thought would be appreciated,del

I gave it a tweek , i think its the slave cylinder the unions not leaking something underneath is! , how much would a garage charge to fit a slave cylinder?

Hi all got a bit of a leak on my 90, it seems to be coming from the the clutch pipe namely the solid pipe union were it joins into the flexable rubber (were its fixed to the bulkhead) ,is this a seal thats failed ,dont seem to be loosing loads of fluid from the resevoir but enough to leave a nice damp patch on the road.

Hi, ny friend nas a discovery and the indicators hazzards are playing up has anyone got the part number for the conrtrol fuse block (if thats what its called) and were abouts he can get one from cheers del

might be the clutch slave or master cylinder check the clutch fluid resevoir,see if theres any thing init

cheers del

Hi all a while back I bought a clutch kit for my 1988 td 90 at a auto jumble, now my td has to be changed to a disco 200 tdi I was wondering if the clutch can be used on the new engine

thats great I will put air hose on my shopping list for sodbury

is it possible to remove the door card from the inside and see if a operating rod has dropped off,when I had my 90 reprayed a similar thing happened and I sort of jiggled the inside catch,pulled the knob up and down and pushed the outside button in and out until it eventaly opened! ,the spray shop blamed the old lock but I white greased the lock and rods up and it works fine now

cheers I think i will use the ebay kit , do you just move the disco air filter in a different position,or is it better to fit a different type of filter housing?

cheers for the info and pics ,am I right in thinking the air filter from the old 19j td engine cant be used on the 200tdi fitment?

was looking on ebay and the steve parker site for the exhaust downpipe and intercooler pipe set and was wondering if anyone had used the cheaper kits and if there was much differance in quality ect, also im told you also need a conversion kit to fit the air filter and housing ,whats the best option for this as mr parkers kit is £200!,cheers del

cheers