landyash

Hi all i am toying with the idea of fitting two defender front seats,in the rear of my double cab is this possible? I know there is not alot of room because of the bulkhead but if there is a way i will try it Many Thanks Ash

If the Alternator is no good it wont matter Tried it lots of times and never had a problem. If the Alternator no good, it can't keep the engine running because it can't produce enough power to power the pump Ash

Hi Mike the best way I know is to start up your landy then remove the negative terminal off the battery,then put your lights on and see if it cuts out. If it does the alternater is no good Cheers Ash

Give it a soak of WD 40 that should help it off. Good look Ash

Look Here Cheers Ash

Hi guys thanks for answer, that's right David mine does have a EGR valve and is a 1997 model,does any one know what fan belt I need?mines screeching and getting on my T*t's Thanks Again Ash

Hello all, can any body tell me what diesel engine starts 23L? Thanks Ash

Hi Woody3, so longs its not causing any problems,don't worry about it,I have had 3 2.5 td's and they all had oil in the filter box. Cheer Ash

Would be better if you could cut out the rust,and weld in a new panel in,if not a option a good rust eater might help??? Good look Ash

Were a you from I have a set of 4 300 tdi rims with 3x good tyres and one bad tyre,if you want for free??? Located in Nottingham. Thanks Ash

Hi try bleeding it at the injector side??does it have a lift pump on the side of engine???could it be on its way out?? When I had the same problem towing it sorted mine??? Cheers Ash

Ok, you would sell lots of items very easy if you decide break it Engine but must be complete with rad turbo inter cooler etc, would sell for any thing between £600 to £1000. manual gear box £100. transfer box £100 front and rear props £15 each. front axle £100. rear axle £100. Then sell the rest has job lot for around £200 to £400. seats, dash interior etc body panels - doors, boot, bonnet, glass, wings shell? chassis? Good Look

Hi Try here Thanks Ash

Hi, so longs the holes are small they should be easy to weld, but the rust will come back. I would weld it for now. Best of look ash

Could be the pump timing or injectors,faulty??? Keep us posted Good look

Hi Bean any news???

Hi Cabbageboy,the best thing to do is spray easystart down the air intake,if it runs brefley,then it will be a fuel problem not a timing problem?? Good look Ash

Hi db if its a 433 one you need,I have a brand new one??? Just send me email?? Thanks LA

Hi Rob, have you had the clocks or any of the lights out lately? you might have trapped a wire fitting them back in?? if not check bulb holders? Good look Ash

Hi Alan, all depends what colour it is? none metallic paints are a lot easier to paint,you can also wet flat and polish any imperfections out, like runs flies etc. If you are going to try and paint it yourself,I would suggest transport paint [synthetic type ] but apply quite a few coats. To do it yourself I would say it will cost around £150 ish in materials. There are a few paint shops in Nottingham,I could get there numbers for you if you want?? Good look Ash

My Csw has no bulkhead behind the seats, and allows my seat to go back further, allowing me a more comfortable drive also a clock in the dash display and alpine windows in the sides. Cheer Landyash

Hi Poacher,my mates has done 200,000 miles and still going strong, but he services it regularly, about 5,000 miles. Don't forget to post pictures