Paul Humphreys
-
Posts
1,248 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Paul Humphreys
-
-
Do you have the transfer box as well? Is it a 1.6? I may take you up on the offer.
I do have the transfer box, but not sure what the ratio is, its an NAD so great if you need bigger tyres.
PM me if you need more details or want my mail address/phone number
Will do as soon as I decide what I am doing. Do you have the props aswell?
Paul
-
So here are the questions,
1, How much would the winch be worth?
you say its not working as it should, it would fetch more if you could get any problems rectified before you take it off...
2, How much for parts to convert back to a manual? (will need clutch master cylinder and peddle as well).
I am breaking an ex Mod 110 which has the gearbox and all other bits still in situ - yours for £170.00 (or would swap for winchy)
3, How much would the 3 speed auto box, with all bits be worth?
there (IMHO) does not seem to be the market for the 3 speeds, so unless your looking at someone who has a similar box for spares...
4, How much is the conversion plate worth?
as above
5, Should I do it or not?
personally, I consider getting prices for what the vehicle as a whole would be worth, then you can balance if its worth changing or buying a manual....
Thanks for that.
The winch works, but needs thePRV setting higher to get it pulling more. Just finding someone to do it.
Do you have the transfer box as well? Is it a 1.6? I may take you up on the offer.
Need to do some thinking first.
Paul
-
Right, here we go.
As most of you know my 110 is fitted with a 3 speed auto. It was, am I led to believe one of 10-12 that were converted for Southern Electric board. It’s never been fast 60 tops, nor will it ever be as it’s a LR. It was fitted with the 200TDi by the last owner.
Here lies the problem, as it’s an auto most things that go with the auto box are custom made. So I am thinking of changing it back to a manual. In the name of more speed (not a lot) as it is not good on hills. Also it will be easier to get parts for.
I have never got the winch to work with enough power as it should, it will pull 2.5T and that’s it. It’s a hydraulic pto driven Superwinch 525. So thats coming off as well.
So here are the questions,
1, How much would the winch be worth?
2, How much for parts to convert back to a manual? (will need clutch master cylinder and peddle as well).
3, How much would the 3 speed auto box, with all bits be worth?
4, How much is the conversion plate worth?
5, Should I do it or not?
Paul
-
Is this the same track explorer from way finder website?
It's got an interesting user interface...
What's the status for me pulling data from wayfinder for process into other applications? I have had a look at how track explorer is interfacing and I can use the same interface I guess.
I just want to download areas and push them into Ozi, possibly via an Ozi plugin.
I can't find any terms of usage for the information or website
I can not answer that as I do not know sorry. But if you email Jon viathe Way Finder website he can tell you.
Paul
-
Theres one called track explorer to hit the shops soon. Just does what you mate is planning.
Paul
-
Well I live less that 2 miles from the place and Iwould not go there for an engine.
Paul
-
Well Ihave been reading about this stuff
http://www.bilthamber.co.uk/corrosionremoval.html
Its ment to be good for rust and paint.
Paul
-
I had considered this one from Ebay, has the SIRF 111 chipset, and states it is waterproof?
http://cgi.ebay.co.uk/Haicom-SiRF-III-USB-...1QQcmdZViewItem
Thats the one I have, works very well. Not sure about waterproof as mine is on the dash on the inside.
Paul
-
Hi
This vehicle is designed for 6 wheel drive Utilising a splitter box with 3 transmission autputs as well as a PTO. This box is stripped due to a colapsed bearing but is included. both rear diff casings are inclined allowing the rear axle drive to be taken over the top of the middle axle
The info I got back.
Paul
-
Was thinking of having a bid on it as I asked and it is a true 6x6.
Paul
-
Well someone on another forum PM me the price for one almost the same. 2.8td fitted. He wanted £1000, I told him it was over priced.
Paul
-
I use a normal laptop for MM and it has lasted a long time. Tough Books are great, but as you sayalot of money. If its just for running mapping software then just get a good 2nd one.
Standard laptops would be fine in the support trucks.
Paul
-
The one I have is,
PN 0905-4491
input 100 - 240v ~1630mA50/60hz
output : +32v 1100ma lps
+16v 1600ma
It takes a standard "kettel" lead.
Paul
-
let me have the part number as I have a brand new one that I got a for a friend and they never cam back for it. Its got the 3 pin funny end on it. Ipaid about £35 for it.
I will try to dig it out later.
Paul
-
^^^^^ hmmmm..... new shiney 110 in the Gap..... nice!!
An it got 2 new dents as well.
Paul
-
Can anyone tell me what band an 07 XS 110 Station Wagon is in ?
I heard a rumour, if you get one with unglazed rear panels, it fits into a lower VED band.
Can anyone confirm/deny this ?
Thanks
Andy
My mate has this one
6 weeks old and hes dented it alreadey.
But its £300 a year to tax, but got the dealer to pay for the first 12 months.
Paul
-
-
For £12 i would have thought it would be worth buying one and cutting the vertical wing flap bit off so it mounts horizontal on the top of the wing. thats what i did anyway.
Any pics?
Do you mean somthing like the rollcage version on here,nice but £££££££££££££££No it wants to come out of the top of the wing.
like this?look for some alluminium tube , usually found in flues. some flexi and your away.
Yes some thing like that, just a same I have the rest of it, just need the bit that goes through the wing.
I will end up changeing the one for the side of the wing and putting it on the top.
Paul
-
thanks a lot. i'm not sure of the ofset of the wheels as i dont have the tyres fitted to the wheels yet, but knowing if it is still made would be helpfull. if not is there anyone out ther who makes someting like this for a truck cab?
Hes not got back to me as yet, but I do know he will be at Sodbury.
Paul
-
Paul, Check Southdowns ebay shop, Dave sells them seperatly, I got the whole set up for £105 I think the Wing mount is £12.50.
If you have a roll cage get it as tight to it as possibe as it will sit on top on the heater box.
Ebay number 110170345873
I did find them on ebay, but its not what I am looking for.
I have just spent 45 mins searching for a pic of what I want, but can not find one.
Paul
-
check the Autumn deals on is site he advertises the bits seperatley
I have seen them, but thats not what I am looking for. I amgoing for a roll cage after christmas so I want one that goes in the top of the wing and not on the corner or side. So I do not have to move it when the chage is fitteds. Looks like I will have to make one.
Paul
-
give Dave a ring he may sell you one separately.
Sorry but Dave who?
Paul
-
I am not sure about this, but if you ordered a new welder from the UK then as its going to Ireland then you would not have to pay the full vat off-setting the cost of shipping.
Paul
-
By any chance was i a Britpart one? As the same thing happened to mine. In the end I got another make.
Paul
Questions
in Defender Forum (1983 - 2016)
Posted
Well the bits I keep breaking are the custom parts. I was going to change the engine, but after thinking about it I am still left with all the custom parts. I was offered a GM V8 diesel and kit to fit, £250.
So I have decided to its either back to a manual, all standard parts or sell it as it is.
Paul