disco tony Posted December 23, 2007 Share Posted December 23, 2007 Just wondering if this is a good purchase? is it worth it or does a hi-lift do better? http://cgi.ebay.co.uk/4x4-10mtr-tow-towing...1QQcmdZViewItem Quote Link to comment Share on other sites More sharing options...
disco tony Posted December 23, 2007 Author Share Posted December 23, 2007 http://cgi.ebay.co.uk/4x4-10mtr-tow-towing...1QQcmdZViewItem oops, try this one!!!!!!1 Quote Link to comment Share on other sites More sharing options...
disco tony Posted December 23, 2007 Author Share Posted December 23, 2007 still having trouble, (could be the vodka!!) try this 230198813441 (e bay #) Quote Link to comment Share on other sites More sharing options...
bill van snorkle Posted December 23, 2007 Share Posted December 23, 2007 I bought one about 30 years ago but found there were very few locations under my series Landy aside from under the fuel tank (not recommended) that had a broad enough surface area free of sharpish projections that risked puncturing the bag. I never actually successfully used it, and one day whilst assisting a normal saloon car owner change a flat tyre the inflating hose fried due to the hot exhaust from that vehicles retarded ignition. The Vacuum advance unit on his distributor had seized in the retard position. Bill. Quote Link to comment Share on other sites More sharing options...
western Posted December 23, 2007 Share Posted December 23, 2007 I've got one, only used it 3 times in the last 10 years, but it works well, last use was to lift the front end of a 7.5tonne truck that had sunk in soft grass, had a hi-lift on the left front wheel & the bag under the chassis rail, as we lifted we filled the hole with wooden blocks, did the same to the right side & then towed in out backwards to hard ground, the trucks owner was very impressed. clicky link to the item mention above exhaust driven airbag Quote Link to comment Share on other sites More sharing options...
MogLite Posted December 23, 2007 Share Posted December 23, 2007 Also a bag of exhaust fumes is a very unpleasant thing. Squeeze most of it out, and then put the smelly thing back in the truck - yuk. Quote Link to comment Share on other sites More sharing options...
missingsid Posted December 25, 2007 Share Posted December 25, 2007 Happy christmas all. I bought a second hand one and found two possible problems, first the cone that goes over the exhuast did not fit very well and second the open shut valve was dried out and not flat anymore which made it leak. Apart from that it was great on soft ground where a Hi-Lift would sink. Quote Link to comment Share on other sites More sharing options...
Betsy Posted December 25, 2007 Share Posted December 25, 2007 I have the Takla 3 ton version, and used it a lot on Morocco with my 2a. It was great for lifting the vehicle out of the sand, and getting tracks under the wheels. I punctured it on the chassis once, but fixed it with a patch super glued on. I also use it on my Discovery 3, which is no good with High Lift jack. I can swap all 4 wheels in 20 minutes. The only problem with the D3 is that it has twin linked exhausts, so you need a good bung in one of the tail pipes. Its great watching the Takla lift both wheels on one side of the D3 to chest height in about 30 seconds! Its also much lighter than a High Lift, and easier to mount (bungee straps attach it to the spare wheel in the back) Its a bit messy to use though, exhaust soot goes everywhere when you disconnect. Quote Link to comment Share on other sites More sharing options...
David Sparkes Posted December 25, 2007 Share Posted December 25, 2007 "exhaust soot goes everywhere when you disconnect.". The trick I was taught to use is to just very slightly lift the pipe end of the cone, so the only place the cone isn't sealing is the 6 o'clock position. The soot is forced down and forwards, away from you, then the pressure is released and you can fully remove the cone. Good to hear someone using them successfully. I think they are like a highlift in some respects; it pays to practice and experiment with them, to find what works best and what doesn't, in a non-stress position, rather than wait for a 'stuck'. I have a 24" square of carpet to go on top, and act as a sharp edge / hot surface protector, that doesn't create a high pressure point. I will admit though, seeing a couple of tonnes balancing on a jelly is a bit daunting!! Cheers. Quote Link to comment Share on other sites More sharing options...
Betsy Posted December 25, 2007 Share Posted December 25, 2007 Yes the 6 o'clock trick works on the 2a, which has an easily reached exhaust outlet which is straight out the back. The D3 has 90 degree bent downwards tailpipes, which are not to easy to reach, and because of the weight of the vehicle needs a good hard shove to keep the pressure in. Its hard to avoid a rather large soot explosion when you remove the pipe! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.