SimonPearson Posted August 12, 2005 Share Posted August 12, 2005 So replaced both track rod ends on Rangie today and test drove it with locking wheelnut key still in one of the wheels. It obviously made a bid for freedom soomewhere along the route! So, how do I remove the now safely lcoked wheelnuts without the wheelnut locky thingy? Quote Link to comment Share on other sites More sharing options...
landrover598 Posted August 12, 2005 Share Posted August 12, 2005 Difflock sell a removal tool IIRC Quote Link to comment Share on other sites More sharing options...
SteveG Posted August 12, 2005 Share Posted August 12, 2005 if it's an LR one just drop by dealership and buy another one. Or yes you can get a tool to remove any locking nut. Cheers Steve Quote Link to comment Share on other sites More sharing options...
Mark90 Posted August 12, 2005 Share Posted August 12, 2005 Or hammer an impact socket on and undo it. That's basically what the removal tools I've seen are. Quote Link to comment Share on other sites More sharing options...
one bob bit Posted August 13, 2005 Share Posted August 13, 2005 banging a impact socket on works as that is the method i use at work but like whats has been said if they are o/e fitment the dealer will have a master key Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.