aerocorey Posted December 18, 2008 Share Posted December 18, 2008 As I dig into the dashboard of my 90 I realize how much hacking has been done to it. Does anyone have a pic of what my dash likely looked like when the truck was new? Not just the cluster, but the whole dashboard. It'm going to redo it. I need inspiration. Quote Link to comment Share on other sites More sharing options...
western Posted December 18, 2008 Share Posted December 18, 2008 Standard from factory dash was like this in lower picture,note NO air conditioning was fitted as standard it was a option. air con fitted dash is in top picture [note also shows LHD] Quote Link to comment Share on other sites More sharing options...
Anderzander Posted December 18, 2008 Share Posted December 18, 2008 On mine the clock is in the binnacle on the right hand side - I see in that bottom pic the clock is in the middle of the dash .... so what is the extra gauge? Quote Link to comment Share on other sites More sharing options...
western Posted December 18, 2008 Share Posted December 18, 2008 the far right extra gauge is a voltmeter also known as a Battery Condition Meter, my '89 110 had one fitted with the RR type rectangular clock in the small centre dash panel. Quote Link to comment Share on other sites More sharing options...
Anderzander Posted December 18, 2008 Share Posted December 18, 2008 Ahh thanks. I wonder why they stopped fitting them then. Mine's a '99 Quote Link to comment Share on other sites More sharing options...
western Posted December 18, 2008 Share Posted December 18, 2008 it was standard on County top of the range vehicles at the time, then IIRC dropped to a optional item, which many owners didn't specify. Quote Link to comment Share on other sites More sharing options...
nikojo Posted December 19, 2008 Share Posted December 19, 2008 How can the dash with the flat front and vents be ordered? What pieces would I need?? Is it from a 110? Can it fit a 90?? Quote Link to comment Share on other sites More sharing options...
western Posted December 19, 2008 Share Posted December 19, 2008 Doubt LR will have any stock of that now as it isn't used on air con fitted vehicles any more, yes it will fit a 90 or 110 if you can find one. Quote Link to comment Share on other sites More sharing options...
PaulMc Posted December 20, 2008 Share Posted December 20, 2008 How can the dash with the flat front and vents be ordered? What pieces would I need??Is it from a 110? Can it fit a 90?? Doubt LR will have any stock of that now as it isn't used on air con fitted vehicles any more, yes it will fit a 90 or 110 if you can find one. Quite a bit of it is still listed in the Feb. 2008 Microcat, but at those prices you'd be better off making something. Paul. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.