leeds Posted May 3, 2006 Share Posted May 3, 2006 Any recommendations for diff guards for a Salisbury axle on a 110? Regards Leeds Quote Link to comment Share on other sites More sharing options...
cols110 Posted May 4, 2006 Share Posted May 4, 2006 I`ve got a QT rear plate gaurd, to protect the guts of the diff. I hav`nt really seen any good salisbury ones that don`t look like a ground anchor. With the salisbury being quite a beefy diff you can get away with a bit more of a hammering than the rover ones. Quote Link to comment Share on other sites More sharing options...
Guest diesel_jim Posted May 4, 2006 Share Posted May 4, 2006 I just won one off eBlag, it's a thick (like 13mm) plate that runs over the bulge in the tin cover plate from top to bottom, with a couple of small bits welded on that line up (i hope!) with the bolts that hold on said tin plate. i plan to get some more 13mm stuff and weld it on, to make a "cover" for the whole of the bottom half of the tin plate. like cols110 says, the front of the axle is pretty beefy anyway, you'd have to really be giving it some welly to break that! B) Quote Link to comment Share on other sites More sharing options...
dirtydiesel Posted May 4, 2006 Share Posted May 4, 2006 Qt guards are pretty good, If you really want to go to town though this is what you want. proper diff guards Dana 60 one fits salisbury. Quote Link to comment Share on other sites More sharing options...
Mark90 Posted May 4, 2006 Share Posted May 4, 2006 Southdown do a salisbury diff guard that wraps round underneath like the QT rover axle guards, but not really necessary on a salisbury IMHO unless you are planning in giving it some realy serious abuse. QT do a nice guard for the bottom half of teh diff pan, or you can get strip type guards for the pan tha the likes of Rebel 4x4 sell. Quote Link to comment Share on other sites More sharing options...
Porny Posted May 4, 2006 Share Posted May 4, 2006 Blatent plug.... but I've got a Salisbury QT Diffguard for sale.... VGC. Was going to put it on flEBay, but haven't got round to it yet! Ian Quote Link to comment Share on other sites More sharing options...
Rizla 1 Posted November 5, 2008 Share Posted November 5, 2008 this any good - http://cgi.ebay.co.uk/Landrover-Salisbury-...A1%7C240%3A1318 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.