gelf Posted June 3, 2006 Share Posted June 3, 2006 imin the middle of removing my QT radius arms so iput the originals back on...... problem is i cant get them lower enoghth to get them out as they are touching the steering bar that goes across. i dont remember removing this to fit them...... tried jacking up various parts to try and get them to clear but no luck ....... any suggestions? graham Quote Link to comment Share on other sites More sharing options...
Phantom Posted June 3, 2006 Share Posted June 3, 2006 Drop the track rod - only two 19mm nuts Lee Quote Link to comment Share on other sites More sharing options...
gelf Posted June 3, 2006 Author Share Posted June 3, 2006 im sure i left it on when i fitted them.......... Quote Link to comment Share on other sites More sharing options...
Andy Posted June 3, 2006 Share Posted June 3, 2006 you know im sure i took one off once with the steering connected - never managed it since either. Quote Link to comment Share on other sites More sharing options...
stripy Posted June 3, 2006 Share Posted June 3, 2006 i've allways had to drop the bar , its close but not that close Quote Link to comment Share on other sites More sharing options...
bishbosh Posted June 3, 2006 Share Posted June 3, 2006 Yup, track rod has to come off in my experience. Quote Link to comment Share on other sites More sharing options...
LR90 Posted June 3, 2006 Share Posted June 3, 2006 Only need to disconnect one end and swing it out the way Not managed with it in situ Quote Link to comment Share on other sites More sharing options...
gelf Posted June 3, 2006 Author Share Posted June 3, 2006 right then......... thats tomorrows job sorted then. thanx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.