muddy4x4xfar Posted December 30, 2010 Share Posted December 30, 2010 hi all. iv been building this td5 defender for a while iv got the full wiring loom all in place. engine as well. when it came to putting the the wires to the battery some of the lights came on on the dash. but the ignition was off. does anyone have any ideas as to what it could be thats causing this. it was the oil light, abs , battery and the exclamation mark in the circle (forget what its called)sorry bout that.. any help wud be much apprieciated. chris Quote Link to comment Share on other sites More sharing options...
Anderzander Posted December 30, 2010 Share Posted December 30, 2010 The exclamation is the hand brake light. Sounds like you got a full house for when the ignition is switched - is your switch faulty? Quote Link to comment Share on other sites More sharing options...
western Posted December 30, 2010 Share Posted December 30, 2010 might be incorrectly connected at the Ign switch. Quote Link to comment Share on other sites More sharing options...
muddy4x4xfar Posted December 30, 2010 Author Share Posted December 30, 2010 hi cheers for your replies. when i bought the loom there is one of the pins is without a plug on it. there is one plug on the loom which isnt plugged onto anything. but it seems or id think it is for something else as it has a longish wire coming form it. any ideas. should it not be plugged into anything maybe (the pin on the ignition switch that is)? cheers again chris Quote Link to comment Share on other sites More sharing options...
Philip Tonkin Posted December 31, 2010 Share Posted December 31, 2010 The colour of your mystery wires would help diagnose if you know. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.