need4speed Posted February 8, 2014 Share Posted February 8, 2014 Just got the temp gauge sender fitted to inlet manifold. AMR1425 I thought i would need a bullet connector to fit it http://www.autoelectricsupplies.co.uk/product/31 But no joy. It doesnt fit. Does anyone know what connector i need to hook up my temp gauge sender? Quote Link to comment Share on other sites More sharing options...
western Posted February 8, 2014 Share Posted February 8, 2014 I used a female bullet connector, just close it up with pliers to make it a tight fit. not given me any problems. or try the 3rd from top in http://www.autoelectricsupplies.co.uk/product/32/category/6 Quote Link to comment Share on other sites More sharing options...
mikec Posted February 9, 2014 Share Posted February 9, 2014 Mines a spade? Quote Link to comment Share on other sites More sharing options...
PaulMc Posted February 10, 2014 Share Posted February 10, 2014 Phil, Have a look at - http://www.retroanaconda.com/landrover/2009/10/installing-defender-td5-gauges-into-a-200tdi300tdi/ James has used a Red insulated bullet with AMR1425 - . Quote Link to comment Share on other sites More sharing options...
Ex Member Posted February 10, 2014 Share Posted February 10, 2014 There are different diameter bullet connectors. The "normal" ones used in the USA are smaller than the ones used on a Defender. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.