Tibout

So to sort it out I'll have to get the head out and retap the thread if it's the block one!

I have not try to put a socket on it yet but I'll try it. That sound the head will have to come out if you are right. Could the bolt have just loosen itself with vibration! Don't know if that's possible

Hi guys I've notice there's some oil getting out of one of the head bolt. It's not a big leak it looks like while driving the out spray onto the rocker cover. Very small leak . I've check the oil for water residue and vise versa with the coolant. Any idea what could be wrong? It's a 300tdi with 127k on it thanks for your help thierry

Thanks I thought the green stuff is good for off roading but I've always use Mintex or lockheed so I think I'll stick to them. I've just been reading a few post that some disco are noisy after pads replacement so that's why I was wondering. Thanks thierry

And any ideas on which pads to get? Thanks

i've read that as well so confusing. it seem that both seal fits in but i won't know which one is better though!!! that means that i could fit either of them. but i could be wrong. i've got a couple of rtc3511 in the shed so that could be handy thierry

and also what will be the recomended brake pads to get? are the mintex or lockheed any good? what about the green stuff one's? the disco is use more as a road drive.

hi i'll have to replace my rear brake pads after contamination from a leaking axle. ep90 was all over the disc and pads. so how do i push back the piston in the caliper? its a disco 300 with abs. thanks thierry

thanks for clarifying. really appreciate

hi guys so landy is a disco 300tdi with ABS. i notice today that there's EP90 dripping on the inner of my back brake disc. anybody know the part number of the seal (there's FTC4785 and RTC3511) i'm not sure which one is the right one. i've done my axle breather as well bu still leaking thanking you in advance thierry

is RTC3511 seal used for disco 300 as well? was on paddock site and it only mention for defender series i think! i could be wrong some clarification please.

thanks for that. it was a lady owner and i don't think she did that modification. i've just clean my axle breather which was blocked really bad. so going to give the pads and disc a clean and see if it's still leaking. thanks again thierry

hi guys so landy is a disco 300tdi with ABS. i notice today that there's EP90 dripping on the inner of my back brake disc. anyone know what seal is it and the part number please tha will be of great help. thanking you in advance thierry

thganks guys i will get a bag under it hopefully not with a hole in it

yeah that's what i've been thinking but my tank is half full

thanks for the advice it runs fine just a bit lack of power at the start. kind regards thierry

hi guys just a quick question. how can i tell if a lift pump is broken or just getting lazy? i try to prime it using the lift pump and it takes about 10 to 15 push on the lift pump handle before any diesel start pouring out. there's resistence on the lever and i could hear air coming out of the bleed screw. when people say the lift pump is getting lazy do they mean that it does'nt work properly or is it just broken? thanks for any advice thierry

hi guys just a quick question. when cleaning the sedimenter, when you remove the top bolt and remove the whole bowl will fuel from the tank keep coming out from the pipe or it's the same as the fuel filter? thanks thierry

thanks guys i've fitted it today and looks great thanks thierry

thanks for the quick reply so it won't foul the 03 model lights?

hi guys, i need a second bumper for a disco td5 year 03. it's hard enough to find a second hand one don't really have the money to get a new one. just wondering if a disco 1999 or 2001 bumper fit the 03 model? thanks for any advice thierry

yeah you got it right it's the egr cooler. so it connect under the coolant reservoir if i'm right? thanks for that

hi guys got a question. so it's a 03 disco 2 Td5 engine. my friend was giving a clean to the engine and by accident he broke a small rubber hose. had a look at it and im not really familiar with Td5 engine. but the hose in question is connected to that kind of aluminium cylinder right in front of the engine behind the fan!!! when i had a proper look it's part of the pipe coming from the exhaust all the way to the manifold and egr valve. if that makes any sense what i'm trying to explain! so we don't know where the other end is connected to! any help will be much appreciated. thanks thierry

thanks for that. i'll remove the EGR completely an dcrim the small hose on the intake hose for now until my other intake hose arrive which i've just order.

so guy if i've got this right: 1:i ca either put the plate between the exhaust and the EGR valve and and leave evrything as it is that will give the same result? 2:remove the EGR valve completely crim the small metal hose which goes from the valve to the intake hose and tuck the electrical connection away and just blank the vacumm hose with a screw or something similar? Does this makes any sense to you guys? thanks thierry