Jump to content

need4speed

Long Term Forum Financial Supporter
 View Profile  See their activity

  • Posts

    2,753

  • Joined

  • Last visited

  • Days Won

    15

 Content Type 

Everything posted by need4speed

  1. need4speed
    Thanks Ralph!
  2. need4speed
    On page 251 of the old defender 110 parts catalogue, the exploded diagram shows a water jacket blanking plug (number 4) which I need 2 of. However the list doesn't specify what it is and therefore what part number it is. HELP RALPH!
  3. need4speed
    I recently bought a second hand speedo from a defender td5. Just received it through the post today and its reading between 10 and 15mph out of the dash! Can they do this when there not wired up or should I be demanding a refund?
  4. need4speed
    Regarding the V8 manifolds, is it ERR7393 and 7394 i should look for?
  5. need4speed
    Are the manifolds I put a link to in my last post the ones I need?
  6. need4speed
    http://www.ebay.co.uk/itm/260980484663?_trksid=p5197.c0.m619 These are what i was looking at. Says they are for 4.0 or 4.6
  7. need4speed
    Will P-38 V8 manifolds be suitable to use on my 110 if the system is custom from the manifolds back?
  8. need4speed
    Try http://www.safari-equip.co.uk/index.php?page=11
  9. need4speed
    Of course TJM now have plenty of European distributors. This may bring the cost down a bit.
  10. need4speed
    McNamara are still very much on the go. However i contacted Jeff at McNamara as a mate of mine has had dealings with him before, and apparently although they designed and built the 'pro-locker' they have sold the rights to TJM of Brisbane. So to answer: yes McNamara diff lockers are still available to buy through TJM
  11. need4speed
    The reason i ask is that ive fitted td5 wheel boxes which of course are upside down. I would imagine that this will affect the position of the motor. Im looking to fit the early type dash that i already have.
  12. need4speed
    Does anyone know if i can fit my early type dash (pre td5) if i fit the motor to the td5 wiper motor bracket?
  13. need4speed
    Good info there OF. Thanks for that. Ralph thanks for that link. Sounds like a useful mod.
  14. need4speed
    Is it a worthwhile upgrade fitting a td5 heater as opposed to the older style? Reason i ask is i notice the td5 matrix has pipes that come straight out rather than having a 90 degree bend in them, or is there a negligable difference between them?
  15. need4speed
    Well i searched for heater rebuild and heater refurbishment and found nada... Really? Is that all that normally goes wrong? How about the blower motor or matrix?
  16. need4speed
    Whilst waiting on bits that will allow me to fit my wiper motor and mechanism i thought id turn my attention to the heater. To be honest it doesnt look too pretty although i havent taken it apart yet. Im not fancying the idea of fitting it without knowing its a good un. Is there any good info about how to refurb them?
  17. need4speed
    yep il let you know james. probably be end of next week mind you as im waiting on a new brush pack coming for the motor,
  18. need4speed
    I was going to fit these http://www.cbsonline.co.uk/product/M6_Rubber_Rivnuts_10pcs_RUBNUT6 but reading about them it says that you just push them into pre-drilled hole and then tighten up fixings. Im not sure these would be strong enough to hold wiper motor bracket in place. Thoughts??
  19. need4speed
    Ok so considering i will be fitting early style dash ive decided to cut that plate off and fit the motor where the pre-td5 motor would go by using rubber coated rivnuts. However ive never fitted a rivnut in my life and would like to know how i fit them?
  20. need4speed
    Yeah well after looking at the price of all the parts (£65 delivered from britcar uk!!!!) i think i will have a go at cutting down the original tube down. Mav im not sure how the motor could drive the opposite way? Wouldnt the wipers initially go the wrong way?
  21. need4speed
    oh bugger. something else i need to get. i would try and just bend the old one to match but guaranteed the spiral drive would bind...
  22. need4speed
    When offering up my wiper motor to the td5 bulkhead i noticed there is a mounting plate on the inside of the bulkhead that the earlier bulkheads dont have. Anyway, to mount my motor to this 'plate' do i use the same hardware ie Wiper Motor Clamp – BHA4790L Wiper Motor Pad – 150844 Nut Plate – MTC2607
  23. need4speed
    Just got it. Page 406 of 450. Thanks Ralph, all clear now.
  24. need4speed
    Ralph that would be a great help if you could scan that in for me. Much obliged as always.
  25. need4speed
    Thats the thing though Ralph, when i took the original gear out of the wiper motor, there were no washers/shims whatsoever. My suspicion here is someone before me has had the motor apart and hasnt put them back. I now need to know where my new washers/shims need to go?
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy

  I accept