steve_a Posted April 25, 2008 Share Posted April 25, 2008 Thanks for all the hosting suggestions, I'll maybe chase a few up and register with some redundant hosting. Feel free to host the file, I have no issues. I'll always post the new version links on here should I update it in anyway. If anyone is using this on Vista I have an option to enable the escalation prompt if wanted, otherwise modifying the launching shortcut is slightly less annoying, but at least it gives you the option and should always enable the application to change the system time. The MG16.dll should have come with the Microcat download, you need to be rigorous about replacing it in the application folder and any other instances on the system. I think the MG16.dll is a generic fix, it is checking for a hardware dongle (well would be checking) and is the same file that has been knocking around for quite old versions of microcat. So it may well work for other brands of microcat, I think I've seen at least one. The microlauncher only works for Land rover data (the way it finds what date to use), however I can probably fix that if really wanted (no one has ever mentioned trying to use it for any other versions). Quote Link to comment Share on other sites More sharing options...
lemains Posted July 22, 2008 Share Posted July 22, 2008 The above links will no longer work as I lost that hosting spacePlease use MicroLaunch Executable And when I am sure of the hosting I will repost the source code. Note: there have been no major changes, except it is now built with VS2005 and likely requires .NET 2 because of this. Hi Steve, I know you posted this more than a year ago but I would very much like to get this working. I have installed Microcat but and followed all your instruction however I keep seeing the error: "This version of Microcat you are running is out of date and will not continue to run" I would be very grateful if you could update the link above. I clicked on it but didn't take me to the file. Thanks a lot, Quote Link to comment Share on other sites More sharing options...
steve_a Posted July 23, 2008 Share Posted July 23, 2008 Check out the hosting linked in my profile. This has links to microlaunch (and saves me posting another link that breaks!) Quote Link to comment Share on other sites More sharing options...
wills Posted August 31, 2008 Share Posted August 31, 2008 Check out the hosting linked in my profile. This has links to microlaunch (and saves me posting another link that breaks!) The link to d/l Microlaunch from your site is broken again, gives a 404 error Any possibility of getting it back up again?? Thanks -Wills Quote Link to comment Share on other sites More sharing options...
steve_a Posted September 1, 2008 Share Posted September 1, 2008 Works for me when I just tried it. Go to my profile and click the link Quote Link to comment Share on other sites More sharing options...
wills Posted September 1, 2008 Share Posted September 1, 2008 Works for me when I just tried it. Go to my profile and click the link ooh, yes, it works now, I was able to download the source code but not the exe. Not being at work I didn't have the tools to build the source at the time. Thank you! -Wills Quote Link to comment Share on other sites More sharing options...
Sandridge Posted September 23, 2008 Share Posted September 23, 2008 Hi, Thx for that great application and your time to sort it out! I am using a microlaunch for feew weeks and it was all good however it now stoped. Message is " Microcat you are runnig is out of date....." I was playing with dset files but with no luck. When microlauncher is hit after the dset files changed the error message is that "Microcat is out of date" Is there any chance to change microlauncher to change a system date back to 02/2008 regardless the dset files?? The old version Microcat Starter 1.1 is turning clock back to 2006 and as far as I am concern this date is to old for the 2008 Microcat Any ideas whould be greatly appreciated Quote Link to comment Share on other sites More sharing options...
Guest diesel_jim Posted September 23, 2008 Share Posted September 23, 2008 The old version Microcat Starter 1.1 is turning clock back to 2006 and as far as I am concern this date is to old for the 2008 Microcat I'm using v1.0 microlaunch on the 03/2008 version of microcat, and it works perfectly. Quote Link to comment Share on other sites More sharing options...
tuko Posted September 23, 2008 Share Posted September 23, 2008 Hi,Thx for that great application and your time to sort it out! I am using a microlaunch for feew weeks and it was all good however it now stoped. Message is " Microcat you are runnig is out of date....." I was playing with dset files but with no luck. When microlauncher is hit after the dset files changed the error message is that "Microcat is out of date" Is there any chance to change microlauncher to change a system date back to 02/2008 regardless the dset files?? The old version Microcat Starter 1.1 is turning clock back to 2006 and as far as I am concern this date is to old for the 2008 Microcat Any ideas whould be greatly appreciated Sandridge, did you apply the dll crack ? It sounds like you have not done so and that's why your getting the out of date message. Like Jim, my 2008 version works perfectly fine. Todd. Quote Link to comment Share on other sites More sharing options...
Sandridge Posted September 28, 2008 Share Posted September 28, 2008 Thx Todd! I will have a go with that dll. file. Best Quote Link to comment Share on other sites More sharing options...
sebbe Posted September 29, 2008 Share Posted September 29, 2008 I downloaded the green oval microcat crack, installed it, and then run the 08/2008 version. Works perfectly! Quote Link to comment Share on other sites More sharing options...
Se7enUp Posted September 30, 2008 Share Posted September 30, 2008 Hi Guys, I'm trying to install Microcat onto a Vista Pc. It installs OK and I've been round and installed the mg16.dl file. Each time I try to open Microcat I get an "Microcat has not found an authorised dongle" error. I've tried using Microcat launcher but it keeps giving me this error. Any ideas? Quote Link to comment Share on other sites More sharing options...
steve_a Posted October 1, 2008 Share Posted October 1, 2008 seek and destroy all the copies of mg16.dll, it will be being cached somewhere. Quote Link to comment Share on other sites More sharing options...
Mean Green Posted November 23, 2008 Share Posted November 23, 2008 Are the 2008 version of Microcat available to download? I am still working with 200609 and it would be nice to be a bit more up to date. Quote Link to comment Share on other sites More sharing options...
mahon257 Posted November 24, 2008 Share Posted November 24, 2008 This may help... http://forums.lr4x4.com/index.php?showtopic=34146 Quote Link to comment Share on other sites More sharing options...
Mean Green Posted November 24, 2008 Share Posted November 24, 2008 Sorry Mahon, Am I missing something (or maybe just too tired to spot)... Is there a link to download for a version of Microcat newer than 2006? Or are you refering to the purchase on Ebay? This may help... http://forums.lr4x4.com/index.php?showtopic=34146 Quote Link to comment Share on other sites More sharing options...
Guest diesel_jim Posted November 24, 2008 Share Posted November 24, 2008 Send me a couple of blank CD's and i'll copy you september 2008 version. It's got the puma, and the puma-SVX on it. Quote Link to comment Share on other sites More sharing options...
gruntus Posted March 21, 2009 Share Posted March 21, 2009 Yet another quick link so it can be downloaded. Not sure about this hoster - was recommended to me, but I will wait and see!microlaunch Executable And for those that want it, the source code Source code I can't promise that this will be the final host, I have a horrible feeling I might have to start paying for hosting, but I guess that is what I have to do to ensure that software is available exactly when somone should want it Get In!!! Just had "The version of microcat you are running is out of date and will not continue to run" error from a very recent downloaded version and using above gets me in a treat! Thank you very much!!!! It is appreciated! Quote Link to comment Share on other sites More sharing options...
draper40 Posted October 30, 2009 Share Posted October 30, 2009 Another issue, I have followed the above crack but when I try to run Microcat i get the message 'The microcat catalogue data is not the latest version'- any ideas? Thanks Pete Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.