ianmayco68 Posted February 12, 2021 Share Posted February 12, 2021 Hi all , could one of you kind people take some measurements for me please , I need the distance of the radiator locating pins from the outside and center to center of the two pins please . Reason is my Alisport xl one which has an Alisport frame and it has developed a leak so I'm fitting a standard one because I'll shortly be fitting an M57 so need to mod the frame , and Paddocks have let me down on delivery after sending emails saying it's been sent and expecting it today then got one to say delivery cancelled and it won't be here till next week as stock run out , so want to do the mods before it arrives . cheers Ian Quote Link to comment Share on other sites More sharing options...
monkie Posted February 12, 2021 Share Posted February 12, 2021 I can in the morning Ian if you don't have the information you need by then. 1 Quote Link to comment Share on other sites More sharing options...
reb78 Posted February 12, 2021 Share Posted February 12, 2021 Haha. I was going to offer the same ^^^ its freezing out there and I cant face going back to the workshed now! 1 Quote Link to comment Share on other sites More sharing options...
western Posted February 12, 2021 Share Posted February 12, 2021 I have my spare rad in garage, I can do some measurements tomorrow to 1 Quote Link to comment Share on other sites More sharing options...
monkie Posted February 12, 2021 Share Posted February 12, 2021 I'm looking forward to being the recipient of your 200Tdi, so it's in my interests to get you those measurements but as Richard says it's just too darn dark and cold right now!!! 1 Quote Link to comment Share on other sites More sharing options...
ianmayco68 Posted February 13, 2021 Author Share Posted February 13, 2021 Cheers all, it definitely is bloody cold out there hahahaha we live high up and the wind isn’t nice at all. Thanks everybody 👍. Quote Link to comment Share on other sites More sharing options...
monkie Posted February 13, 2021 Share Posted February 13, 2021 Outer measurement: 373mm Centre measurement: 365mm ... My fingers temperature: 0'C Quote Link to comment Share on other sites More sharing options...
ianmayco68 Posted February 13, 2021 Author Share Posted February 13, 2021 Cheers monkie, know how you feel I’m at work was -4 this morning at 6.30 am not much warmer now 🥶 1 Quote Link to comment Share on other sites More sharing options...
western Posted February 13, 2021 Share Posted February 13, 2021 just measured mine as well. with front of rad facing forward for all measurements approx Top plate from right side to pin centre 90mm left side to pin centre 75mm pin centres 360mm Bottom plate right side to pin centre 100mm left side to pin centre 70mm pin centres 360mm 1 Quote Link to comment Share on other sites More sharing options...
ianmayco68 Posted February 13, 2021 Author Share Posted February 13, 2021 Cheers western , will have a look tomorrow as it's supposed to be warmer , hopefully . 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.