kevin50 Posted July 16, 2022 Share Posted July 16, 2022 Really need to get the wiring finished on my rebuild. Using the harness from a ex MOD Ambulance, so there will be a few wires that I dont need. Got some wires identified with help from a friend , got a pretty good idea of what goes to what in engine bay and rear of chassis but struggling with how to wire the dash gauges up. The wires on the left in pic are for heater and wiper motors so they are straight forward its the rest I need help with like Ignition, fuse box, solenoid lights ect. Quote Link to comment Share on other sites More sharing options...
simonb Posted July 17, 2022 Share Posted July 17, 2022 Try this: http://www.expeditionlandrover.info/Lucaswirecode.htm Plenty more colour decoders on the Interweb for Lucas/British vintage vehicles. Quote Link to comment Share on other sites More sharing options...
kevin50 Posted July 17, 2022 Author Share Posted July 17, 2022 10 hours ago, simonb said: Try this: http://www.expeditionlandrover.info/Lucaswirecode.htm Plenty more colour decoders on the Interweb for Lucas/British vintage vehicles. Thanks seen that , some wires on mine I dont reconise. Pic of Gauges and Wires that lead to it.Got the Ignition barrel to fit to dash and need a new switch for lights.I know the wires on left of pic go to wiper and heater motors.Can anyone point me in the right direction to which wire goes where from pics so I can get started on this ? Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted July 17, 2022 Share Posted July 17, 2022 The green bible (Series workshop manual) has full pictures with all the wires on the back of the dash - if you haven't got one they're out there on the internet as PDF's for free if you search. Edit: Here you go 1 Quote Link to comment Share on other sites More sharing options...
pete3000 Posted July 18, 2022 Share Posted July 18, 2022 Interesting, i see they mark the GW for RHS indicator telltale 3, so 10 LHS has to be GR which isn't marked. The rest make sense with RW the gauge backlight feeds (fed/isolated by the panel light switch 2) Ignition switched (fused) Greens to feed the various gauges/switches Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.