siearl Posted December 26, 2007 Share Posted December 26, 2007 All, About to start fitting all the radios and ancilliaries to the 90 and was wondering if there is anything out there that i can run one + and one - connection from the battery to a fuse box then take 3 or 4 power offs for the radios instead of lots and lots of wire going to and from the battery, hopefully that makes some sense Si Quote Link to comment Share on other sites More sharing options...
RRX Posted December 26, 2007 Share Posted December 26, 2007 Why not run one main powerfeed from the battery and use something like an amp power splitter like This One saves running lots of power through the fusebox and gives all the equipment a good source Quote Link to comment Share on other sites More sharing options...
Earl Posted December 26, 2007 Share Posted December 26, 2007 Hi SI have a look at Vehicle Wiring Products . Adrian Quote Link to comment Share on other sites More sharing options...
siearl Posted December 26, 2007 Author Share Posted December 26, 2007 Thanks , Adrian will probably give you a ring in a few days, that is the sort of thing i am after RRX however would i not have to run individual power leads fro mthe battery to it Quote Link to comment Share on other sites More sharing options...
minivin Posted December 26, 2007 Share Posted December 26, 2007 http://www.vehicle-wiring-products.eu/VWP-...me/homepage.php http://www.vehicle-wiring-products.eu/VWP-...es/holders1.php Not much on the blade fuse side for single connection, but plenty of alternatives at VWP Quote Link to comment Share on other sites More sharing options...
general-confusion Posted December 27, 2007 Share Posted December 27, 2007 try this 300 A junction box...just run 1 large supply cable to it from the battery and then separate fused supplies from it http://www.vehicle-wiring-products.eu/VWP-...ttconn.php#jbox Quote Link to comment Share on other sites More sharing options...
streaky Posted December 27, 2007 Share Posted December 27, 2007 I use these for simple fused distribution boards. One feed goes in and eight fused connectors come out. Quote Link to comment Share on other sites More sharing options...
mpb Posted December 27, 2007 Share Posted December 27, 2007 try this 300 A junction box...just run 1 large supply cable to it from the battery and then separate fused supplies from ithttp://www.vehicle-wiring-products.eu/VWP-...ttconn.php#jbox I fully recommend these, used one a customers disco I fitted a load of warning lights to. I ran a 16mm square cable from the battery then split it to, to feed a load of relays. Quote Link to comment Share on other sites More sharing options...
Matthew Posted December 27, 2007 Share Posted December 27, 2007 All, About to start fitting all the radios and ancilliaries to the 90 and was wondering if there is anything out there that i can run one + and one - connection from the battery to a fuse box then take 3 or 4 power offs for the radios instead of lots and lots of wire going to and from the battery, hopefully that makes some sense Si Hi Si, This should solve your problems...wont' cost any more to send with the door liner and light guards!! Not sure on exact price of the product though, will let you know with carriage quote if you like?? http://bluesea.com/files/resources/sales_s...2,500%20KB).pdf http://bluesea.com/files/resources/dimensi...rawing/5026.jpg Thanks, Matt Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.