Simon B Posted December 3, 2008 Share Posted December 3, 2008 Does anyone have any pictures of a dash strip out to show the configuration of the demister assy. A drwaing would do if there's such on microcat (not got my copy working yet) Quote Link to comment Share on other sites More sharing options...
wobble_hd Posted December 3, 2008 Share Posted December 3, 2008 http://www.wiberg-wiberg.com/brochurer/DefenderVentnov08.pdf Hope this help! Regards M Quote Link to comment Share on other sites More sharing options...
western Posted December 3, 2008 Share Posted December 3, 2008 from the 110 1987 on parts book. Quote Link to comment Share on other sites More sharing options...
western Posted December 3, 2008 Share Posted December 3, 2008 http://www.wiberg-wiberg.com/brochurer/DefenderVentnov08.pdfHope this help! Regards M Nice neat installation, which vehicle or supplier did the vents come from ? Quote Link to comment Share on other sites More sharing options...
Guest diesel_jim Posted December 3, 2008 Share Posted December 3, 2008 Agreed, that is very neat. IS there an "off the shelf" kit for these? very similar to the military side vent kit too. Quote Link to comment Share on other sites More sharing options...
Anderzander Posted December 4, 2008 Share Posted December 4, 2008 from the 110 1987 on parts book. That's a good pic - where does the control cable fit to on there? Quote Link to comment Share on other sites More sharing options...
Lars L Posted December 4, 2008 Share Posted December 4, 2008 Wiberg & Wiberg is a Danish company selling "stuff" for Land Rovers. Just order from them and you'll have your vents in a few days. Quote Link to comment Share on other sites More sharing options...
wobble_hd Posted December 4, 2008 Share Posted December 4, 2008 Nice neat installation, which vehicle or supplier did the vents come from ? As Lars said it comes from a Danish company, and a chap in Norway reports very positive! Tjena Lars førresten! M Quote Link to comment Share on other sites More sharing options...
wobble_hd Posted December 4, 2008 Share Posted December 4, 2008 Here is the thread on the Norwegian forum: http://www.lrforum.com/forum/index.php?showtopic=33743 Regards M Quote Link to comment Share on other sites More sharing options...
western Posted December 4, 2008 Share Posted December 4, 2008 Might just order a set of those vents after Xmas, IIRC the control cable in my parts pic above goes to the end nearest the instrument pack, you have to move the instruments clear to get access Quote Link to comment Share on other sites More sharing options...
Simon B Posted December 4, 2008 Author Share Posted December 4, 2008 That's brilliant chaps, more than I'd asked for, might be getting some Wiberg n Wiberg kit. I think in this cold wether my pipe has fallen off my nozzle....chuffing parky to say the least! Quote Link to comment Share on other sites More sharing options...
western Posted December 4, 2008 Share Posted December 4, 2008 in this cold wether my pipe has fallen off my nozzle.... was it painfull Quote Link to comment Share on other sites More sharing options...
GL88 Posted December 5, 2008 Share Posted December 5, 2008 Those Wiberg vents do look good but 133 Euros seems a little on the high side. Perhaps someone might start making them in UK or else a bit of ingenuity with fibreglass mat and research for small vent grilles could be called for. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.