need4speed Posted April 7, 2010 Share Posted April 7, 2010 When building onto a new chassis, given that the loom runs through chassis, how do you get the loom through the chassis? Quote Link to comment Share on other sites More sharing options...
LandyManLuke Posted April 7, 2010 Share Posted April 7, 2010 I wouldn't bother, clip it down the outside of the chassis, preferably along the top. That way, it's easier to get at and it stops being a mud trap in the chassis, It should be easy enough to make sure its up out of harms way. Quote Link to comment Share on other sites More sharing options...
western Posted April 7, 2010 Share Posted April 7, 2010 I'm with Luke, route along the upper inner edge tywraped at intervals, you could wrap the wiring in spiral-wrap or the split convoluted tubing. Quote Link to comment Share on other sites More sharing options...
mmgemini Posted April 7, 2010 Share Posted April 7, 2010 I'm with both Luke and Ralph. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted April 7, 2010 Share Posted April 7, 2010 I agree with them also too as well additionally. What they said. Yes. Quote Link to comment Share on other sites More sharing options...
jbs Posted April 7, 2010 Share Posted April 7, 2010 I did put my loom through my chassis when i did my rebuild I used a length of brake pipe to get it through too Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.