chris2010 Posted October 22, 2014 Share Posted October 22, 2014 need some advice. defender 90. 300 tdi auto i have recently got a 300 tdi ,autobox and transferbox from a discovery. the transfer box has a speedsensor fitted , instead of a speedo drive to run cable. what parts will i require so i can use my 90 speedo cable . the parts place at local 4x4 place isnt being very helpful. thanks in advanced Quote Link to comment Share on other sites More sharing options...
ejparrott Posted October 22, 2014 Share Posted October 22, 2014 I thought the speed transducer just went in the hole the speedo cable went in, have you tried? Recently discussed swapping a dead 300 disco manual speed transducer with a TD5 defender one Quote Link to comment Share on other sites More sharing options...
chris2010 Posted October 22, 2014 Author Share Posted October 22, 2014 To be honest no i havnt will Remove it and have a look Quote Link to comment Share on other sites More sharing options...
western Posted October 22, 2014 Share Posted October 22, 2014 Remove the transducer, get the U shaped retainer plate & slot the cable into place as per a standard mechanical speedo 90 or 110 Quote Link to comment Share on other sites More sharing options...
landroversforever Posted October 22, 2014 Share Posted October 22, 2014 What Ralph said, remove the sender, and the cable will go straight in with the U shaped clamp to hold it in. Quote Link to comment Share on other sites More sharing options...
rrr47 Posted October 22, 2014 Share Posted October 22, 2014 I agree with everyone, I have a Range Rover classic with speed sensor speedo, which has never worked, I changed the sensor which is just a box that a short speedo cable goes into. The gearbox end is just the same as the good old speedo cables. My speedo still does'nt work, an ECU problem I think. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.