Oakmaster Posted February 11, 2015 Share Posted February 11, 2015 I think Id like to fit an Anderson Connector to Jumper -to and from my V8 110 what amp rating would you suggest? (I have 2 other Land-Rovers and a VW camper to start!) and what rating for the Battery Isolator? (and where to buy?) And finally - can you / would you use welding cable to make up the jump leads All help appreciated - this is a great group cheers Quote Link to comment Share on other sites More sharing options...
Mutley Posted February 11, 2015 Share Posted February 11, 2015 Noy sure of amps but it's the grey ones as they are colour coded iirc. Hope that helps Quote Link to comment Share on other sites More sharing options...
dioliahary Posted February 11, 2015 Share Posted February 11, 2015 I used 160 amp but only because they were free, i am sure you could get away with less. Any isolator from a car accessory spare shop will do. I also got 25mm industrial cable buckshee to make up the loom. Quote Link to comment Share on other sites More sharing options...
western Posted February 11, 2015 Share Posted February 11, 2015 the grey 175amp anderson connectors used by AA & RAC for jump starts. for a isolation switch the big brass key unit handle a constant 250amp & go up to 1000amp for very short periods ready made jump leads [example] http://www.vehicle-wiring-products.eu/product.php/177/170a-booster-cables-5m 1 Quote Link to comment Share on other sites More sharing options...
need4speed Posted February 11, 2015 Share Posted February 11, 2015 Alternatively try mobilecentre for HD jumpleads with Anderson attachment already done for you. Plug n play. As it were Quote Link to comment Share on other sites More sharing options...
ejparrott Posted February 11, 2015 Share Posted February 11, 2015 I've got big red ones, and a convertor down to the grey ones. Quote Link to comment Share on other sites More sharing options...
need4speed Posted February 11, 2015 Share Posted February 11, 2015 ...I've got big red ones.... Should see a doc about that... 2 Quote Link to comment Share on other sites More sharing options...
stuck Posted February 11, 2015 Share Posted February 11, 2015 Simon @ X-Eng used to do them ready made up, I've got a set in my 110. Edit: Just checked the Foundry website but they aren't listed so this post is Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.