Badger110
-
Posts
1,174 -
Joined
-
Last visited
-
Days Won
13
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Badger110
-
-
Brilliant, but not quite
After one evening sitting there in the workshop, covered in green overspray, slightly high from the fumes and tired and on my 6th coffee staring at the bonnet it came to me that a cool idea would be to rearrange the letters of Land Rover and use that as a future name for our travels.
OverLandR.co.uk was born.
Although I do think some of the ideas have been worthy of a sub section
-
1
-
-
7” ?
The wife says that’s not a lot of room but I explained it’s engineering 7” which is slightly different than biological 7” and when I showed her on the ruler she asked where I get my biological measurements from as they’re about 3” short
-
1
-
-
You make it sound like I'll be charging people to come along for the ride Stephen
-
I've not had time to look into this anymore at the moment, work tends to get in the way of these things!
-
I am now fending off the wife's new love for the truck of wanting to bolt carp to it, but I do agree that while the tyres are good for the time being I do want to get some new ones soon as the rears are running a little low.
She wanted to go the route of Sawtooth's and I wanted Blindos, but I'm sticking to my guns and keeping the Wolf's as they are a good wheel and well, why not?
Tyre choices are so many and I'm along the lines of 255/85/16 size or thereabouts, the XYZ's are great but a little skinny and yes, I am being bit vain here, it would be nice to have something that is easily picked up and looks like it fits the arches for a defender and not a series.
There are many many threads on tyre choices and I've read a fair few but feel free to chip in with your thoughts on a tyre which will be good for long travelling with decent off road ability
The downside ( or upside? ) to changing to larger tyres is to move the spare to the back again as I don't want it hanging off the front looking like pig ( as one of my friends told me through laughter when I showed him a picture a few months ago! ) and that means changing the front bumper to a winch bumper and gracing the front end with a motor and some rope attached for pulling duties
Oh and I've registered a web name for our travel website/blog idea...
I'll let you come up with a guess as to what it is
-
- Popular Post
- Popular Post
1 hour ago, SHY 7G said:Fantastic looking beast!!
BUT SORRY TO SAY will it now been know around town as that 1980's fitness star Diana Moran, better known as the Green Goddess 🤪🤪
With that and @western reminding me it looks abit like a utility truck from the 90's, the missus mentioning we should park it at Asda I'm beginning to think that I should've stuck with my choice of Orange and Grey!
On 2/28/2021 at 9:50 PM, ThreePointFive said:I think we need to see it with the roof up.
it's usually a 2nd date before I lift my top for anyone, but as you asked nicely...
-
3
-
3
-
Welcome aboard!
Your travels sound interesting, I look forward to seeing your project come to life
-
- Popular Post
- Popular Post
Spent all day putting the truck back together as it's needed tomorrow for work ( wife wants her truck back )
It's amazing how long it takes to bolt stuff back on and go round with a paint brush and fill in the bits of overspray and bits I missed.
I didn't get the roof or the rear cross member sprayed up as it was too cold and to be honest it took all day putting it back together so that will be done at a later stage.
A few car park posing pictures
I was abit disappointed with the doors from SP4x4 if I'm honest. They are sold as a direct replacement for a defender door in series style but they took some work to get to fit properly including adding a small 2mm thick steel wedge to keep the door tops from ripping the seal around the door every time they shut. The top part of the door leans in towards the truck too much.
The locks are a bugger as the B & C pillar's are designed for later style locks so it takes a while to get them lined up, but the O/S two are now done.
I found it easier in the end to split the door and just concentrate on getting the bottom to close and lock correctly then deal with the tops afterwards.
I ordered some seals from seals direct for the bottoms of the doors ( link here https://www.sealsdirect.co.uk/pdf/ETS58DR.pdf ) which was for the 4 door bottoms and the rear door bottom, however the rear door seal was knackered so I did 2 doors and used this seal to replace the entire rear door. I did find it didn't work on the rear door at the bottom though, it doesn't compress enough so the seal needs an offset bulb to work.
It fits perfect and now I have no gap on the bottom left of the door where the old one was shagged.
It's a decent price at £4.70 per metre
-
7
-
I've doing some digging around and it looks like this question isn't as remote as I expected.
Two things which have been brought up are;
Compressed spring happening beyond the travel of the shock and extended spring being beyond the travel of the shock.
First thing is, when the spring is compressed or the axle is articulated at the maximum point of it hitting the bump stop, will this be beyond the collapsed point of the shock and second point is when the articulated at the max point, does the extra travel of the shock cause the spring to dislocate.
Looking on fox's website, the standard Fox 2 Pro shocks are as follows;
Ext length Col length Travel
985-24-079(R) 21.13" 13.25" 7.88"
985-24-078(F) 21.65" 13.05" 8.60"
Fox Pro 2" lift shocks are as follows
985-24-144(R). 24.03" 14.95" 9.08"
985-24-143(F) 23.88" 14.30" 9.58"
For the fronts, the collapsed length is 1.25" ( 32mm ) higher than standard and the rear is 1.7" (44.5mm) higher. Based on this, an extension of the bump stops by those amounts or, to be safe, an amount beyond those, will stop the shock being compressed beyond it's limit.
How does that make the vehicle behave in situations where articulation is happening at the extremities of the axle? The slightly longer travel of the shocks ( 1.2"/30mm front and .98"/25mm rear ) will make the non compressed side of the axle move further away by the amounts given or will it be more?
Dislocation cones should stop the spring being unseated the extra 30mm & 25mm of travel length
Fox don't give details of the internals between the 2 shock other than one is remote and the other has internal floating pistons. It also doesn't give the seated height of the shock ( when it's at rested) although I guess that isn't possible as an awful lot of weight information of the vehicle is needed before that figure can be worked out.
Dislocation cones and extended bump stops are a must then.
The standard shocks will be unpacked and fitted and I'll be on my merry way with no dramas to worry about, but there is that niggly feeling that will it work with a little more effort and a better shock at the end of it and the savings can be put to dislocation cones and extended bumps stops to break even...
The question is, how will handle? General consensus from the past 2 hours spent reading up on it, is no real difference to a standard as long as you are prepared to set it up correctly.
-
I'm looking to upgrade the shocks on the 110.
Fox 2 seem to be the worthy choice and pricing them up, they're within budget.
I have a standard height set up on a USW.
If I buy new it's £600 for a full set, however JE are selling off the better adjustable range for £450 a set, however they're 2" lift version.
I'm not that savvy on suspension if I'm honest, but can you fit 2" lift shocks to a standard spring set, and if so, what will happen?
I don't want to raise the truck with a lift, would it be possible to dial down the 2" extended shocks to a more suitable to standard height without compromising the ability of the shock?
Am I right in thinking 2" extended lift shock will allow more travel from the unit but the ' rested ' state of the shock is down to the spring height?
-
That’s looking colourful 😁
-
Thanks for that, how are they over a stock?
-
On 5/5/2020 at 10:13 AM, Koen110 said:
Same question, lift for road use!? You are going to regret that..
I looked for new suspension for my Puma last month, still had the original ones. I looked at Bilstein, Koni & Fox. After looking at reviews & talking with mechanics I bit the bullet and went for the, more expensive, Fox shock absorbers. I reused the original springs, nothing wrong with them.
Handling is better and the puma takes the bumps and pots much better now, certainly at a speed (> 30mph), but don't expect a range rover! It's still a Defender.
I'm looking to replace my britpart beauties with fox shocks and keep the original springs for now, which model are those that you have fitted?
-
She has been unwrapped now and the next job is to GRP the plastic cowls in the lift up roof before we do the last major bit of spraying the roof black.
I have a large snagging list which is to be expected as this is a ' doors shut ' spray job, and the actual doors haven't been painted on the inside, just primered.
I've got the grill surround and steering guard to go green, the top box and a few other bits to go black and she'll be done
-
Taking advantage of the good weather
-
3
-
-
I am now banned from the internet if any alcohol has entered my body due to purchasing things whilst under the influence.
Which means Tuesdays and Sundays are the best time to message me
-
2
-
1
-
-
22 hours ago, Bigj66 said:
Speak for yourself, it’s a V8 series all the way for me, leafs an’ all 💪😉
If I could afford one I'd be right there with you
-
Looking at a SW husky 10 which seems abit more sensible
-
Welcome 😁
-
The novelty of the warm has worn off, mainly as it’s flipping heavy to consider moving about.
-
https://www.facebook.com/marketplace/item/227754249046674/?ref=search&referral_code=undefined
If you have fb, then that's the one.
I'd rather have a low profile if I'm honest, and not necessarily a Warn either if something is worthy.
-
That was my idea, as with the spare mounted at the front, I would probably have it mounted at the rear most of the time and swap over should I need it up front.
This one is up for £800 and I figured that was a good price for a quality unit but looking at it, it's a beast!
9000lb might be a better idea and approach angles aren't an issue until they are
-
I believe the over inflated prices are a hype and are being spurred on by the odd belief that the somehow Land rovers have become valuable.
I spoke with someone today who purchased a 90 3 years ago for 5k and now they're selling it for 8k according to the faceache group advice.
It's a 200Tdi on a galv chassis with rot in the bulkhead at the usual spots.
5 years ago I paid £1500 for a 110 TD5, which was a good buy but it needed a little work to get it straight.
Nowadays that same truck would be up for sale for 7-8k?
Madness
-
1
-
-
Having looked at a Warn 8274, it seems that any pictures I've seen online of them fitted to anything past the rebated grill means that the grill has been cut to accommodate the winch.
To get them fitted to a standard winch bumper will require the grill to be cut to the outline of the winch?
New to me toys
in Tools and Fabrication
Posted
It does look impressive, what was you using beforehand?