SteveG
-
Posts
3,629 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by SteveG
-
-
-
7 hours ago, Retroanaconda said:
Yes the plan is to paint the floor, will help to seal and protect the concrete as well as being nicer to work on. I’ll probably try the company that @FridgeFreezer used as that seemed to work well for him. I must resist the temptation to start moving things in beforehand, as I know that if I have to empty things out to do it then it will never get done.
Walls too - light grey for the floor and white on the walls, though the latter will be bog standard emulsion
For the floor you could roll on Upol Raptor. 2 coats would give you a very hard wearing surface that’s resistive to fuel, oil spills.
-
35 minutes ago, Bowie69 said:
No, this was quite clearly stated, 2m from anyone not in the same household.
Just posted this, as clearly the media are ignoring this. I know it makes for a good picture and headline, but showing pics of people walking hand in hand, small groups of people with no context is hardly mass ignorance of the guidelines. Shocking picture of people at the seaside in the daily mail...
-
To be fair, the government gave less than clear guidelines. Most of the restrictions were aimed at over 70’s and vulnerable, then for the rest they told them to avoid large gatherings and actively encouraged people to get out in the fresh air. So is it no surprise that people go out on walks, to the seaside, on their motorbike etc.
Apart from queues for at takeaway food places etc. probably most people were following the guidelines. If a couple that live in the same house, sleep in the same bed, are they to walk 2m apart outside. Same with families that live in the same house use the same bathroom, eat at the same table, are they supposed to walk 2m apart everywhere when they are out?
Last night, as a result the government then says all but essential travel - this isn’t what they were saying previously.
It’s a bit amateurish changing these guidelines on a daily basis. First of it was bars & clubs to avoid. Then they start adding cafes and restaurants, then they close them all.
Next as predicted, it will be a total lockdown.
-
13 minutes ago, smallfry said:
We will be wearing masks even if everyone else does not.
Why are you expecting everyone to be wearing a mask, when it’s been proven that they offer no material benefit?
-
2
-
-
When 4hp rescues truck...
-
7 minutes ago, Mo Murphy said:
Is it so wrong to want to resort to violence in his case ? 😉
Mo
Take a deep breath Mo, he’s not worth it 😉😉😉😉😉😉
I don’t think I’ve ever heard him saying a good thing about the previous Defender. Interesting to hear how other car designers talk and where they want to keep that authentic engineering look and function over form. Not Gerry he wants to portray solidness through a stuck on painted panel. 🙄
-
1
-
-
Gerry gets all defensive, oh dear...
https://gearpatrol.com/2020/03/09/land-rover-design-boss/
best quote, below - I think that’s mostly because he’s not ‘a car guy’, as Jay Leno would say.
QuoteWe were thinking earlier about where do your influences come from; I’m not your typical car designer,
and this piece gives an indication of what he thought of the previous Defender....
QuoteBut the [side of the old ones] was so flat because the pressings were such carp. On some of these [older] Defenders, you look along the body side and it’s like the Atlantic Ocean. Well, that’s unacceptable for a modern-day vehicle.
-
13 hours ago, Anderzander said:
It’s badged as ‘an uncompromising 4x4 with separate chassis and live axles’ ...
If I recall the Bronco will have the same setup as the next gen Raptor, independent front and live axle in the rear with coils and a watts linkage. Current raptor uses leaf springs in the rear.
-
Personally, and this is not an attack, but maybe it’s you that has the minority view and not the journalists. Mordern cars, for the most part, are more comfortable, steer better, handle better, brake better than a Defender or the new Jimmy. This is especially so on a long journeys and at higher speeds that journalists will normally use for their tests. High speed A/B roads with compressions etc. will show up a live axle easily. Add in the cheap plastics, small space etc. and it’s no wonder most don’t like the Jimny and previously the Defender.
Now, you see past all the downsides and like the Jimny for what it is, most journalists naturally won’t, so is it any wonder that you see the negative reports?
-
On 3/2/2020 at 11:37 AM, geoffbeaumont said:
Google ads are personalised to you - they're based on what Google has recorded you looking at...
The rest of us see different ads based on what we've been looking at.
Now Geoff I’m sure you already know that’s not correct. 🙄 It’s based on a whole mix of things, things you’ve looked at, demographic profiling, especially if you have a google account, locale, destination site profile and as I pointed out also what other visitors of that site have viewed elsewhere.
Now as I’d never seen that ad displayed elsewhere, and the fact that it was an individual product item not a general site advert, I can be certain that it was a regular visitor to LR4x4 that had previously looked at those boots. Now, looking at the boots, I can understand them wanting to be anonymous, and they can remain that way as it was only posted as a joke, not a witch hunt. 🙂🙂🙂🙂
Now, some might question, why you are trying to infer that I’d looked at them, and this may be a diversionary tactic by you. 😉😉😉😉😉
cheers, Steve 🙂
-
I had the same issue as you, complete novice but wanting to produce relatively good results. The best investment I’ve found is in the compressor. Good high CFM, seems to top out at 14CFM with a compressor running on normal mains power, and with a 150-200l tank. I’ve found when doing full panels, the 200l tank gives you enough air to get some good passes In before the compressor kicks in. If I’m doing a top coat and clear coats, I tend to wait until tank is full before moving on. For primers etc. there’s more leeway.
For a gun, I went with a 3m accuspray one, that allows various tips at an affordable price. It’s very easy to clean, and the 3m pps system makes it easy to mix paints and use. You get about 10-20 uses out of the tips, depending on how thorough you are about cleaning and the type of paint in use. https://www.spraygunsdirect.co.uk/index.php/3m-accuspray-hvlp-primer-spray-gun.html#sthash.lOSaD5df.dpbs
I built a home made water trap, sorry no pics other than this one. Just a simple board with a few passes of push fit pipe that then feeds a water drop, two stage air filters and a regulator. I use the hi-flo air fittings throughout and sufficient diameter air hose so that the connectors are the smallest diameter.
I tried a dual tank setup, to feed my air fed mask using old compressor and new, but even this setup couldn’t support both. I suspect you need a good 20CFM plus to do this and my free flow combined was probably nearer to 16-18. I considered using one compressor to feed the mask, but then I’d have the additional investment of another filter and water trap set up. With the air fed mask you also get into a mode of needing to ensure that the compressors are placed where they can draw in any fumes from painting. So for the majority of my painting I’ve used an open free flowing area, 3m half mask, goggles and a full paint suit. I wear this when mixing paints too. I’ve built a home made booth, with an extraction fan, and this is great for reducing contamination, no wind etc. but I suspect it’s not the best from a health & safety point of view.
Practice obviously helps, but it doesn’t take long to get to an acceptable standard. I’ve found the hardest is clearcoats and getting enough coverage to gloss, without any runs.
-
these weird boots that google ads keeps posting all over the place...
it’s really off putting. 🙄🙄
-
3 hours ago, landroversforever said:
If I had the cash, I’d have one in a heartbeat. I’ll always wish that JLR had made the defender more in keeping with the design and use of the old one, much like the wrangler is to the old Willys. But sadly for the size of a manufacturer like JLR, for the given cost of building a car, going away from the utility market they can make so much more money on a car.
Personally, I think the looks and more importantly the price will result in a failure For LR. If it succeeds in replacing D5 sales, that’s a failure for the company as a whole. At the prices they’ve set, I just can’t see it selling in high enough incremental sales for LR. A couple of years and we’ll know the answer.
-
6 hours ago, monkie said:
As a fellow motor enthusiast and tax payer, it makes me so mad to hear things like this that it is extremely difficult for me to moderate my own language to stay within forum rules. I will try nonetheless!
In my opinion it's lazy policing in the extreme. It's a good and sensible suggestion above to remove numberplates to prevent this Tom foolery, but why the hell should an honest person have to do this when the car is legally parked on your own ground?! If they actually bothered to get off their backsides and check some very basic facts and ask some simple questions once your vehicle had been flagged for whatever reason and saw your vehicle in an obviously unable to drive condition it would stop them wasting yours and their time. But oh no, "just send him a letter, he must be guilty if our computer has flagged the numberplate".
If they do have reason to believe someone is using a car they should be able to provide solid photographic evidence rather (God knows there's enough cameras stuck all over the place) than relying on ANPR from a passing car or one or two nosey neighbors.
There. *%#!ing rant over!
I'm now going to have a nice relaxing cup of tea to calm the *#%! down.
Equally though - I’m not a fan of the amount of vehicles driving around that are paying no car tax and insurance (1 in 8 vehicles in the worst areas).
If they’re increasing cameras cars to catch these, as per their current Tv and radio ad campaigns, then personally I think that’s a good thing. Unfortunately, it seems their software needs updating, however, you can understand why they check cars on driveways too, as it’s likely in most cases these vehicles would be in use.
-
2
-
-
-
2 hours ago, elbekko said:
.My E-class also is an auto with start/stop and an electric handbrake. What you describe has never happened to me.
Your e-class has a proper auto box in it, I suspect it’s with dual clutch boxes like anything from the VW stable as I’ve had this happen too.
The e-class auto also has the double press brake pedal feature that only merc seem to do, where it will hold the brake on for you, then you just have to accelerate to set off. What a labour saving tech feature that we all need 😉😉😉
-
1 hour ago, Soren Frimodt said:
Eventually I will add to it so I can run the engine on there, but for now it'll allow me wheel it around
Is this what you mean by “eventually I will add to it”...
😉😉😉😉
-
1
-
3
-
-
I see that Discovery 5 sales slumped by 43% in the UK in 2019.
it will be interesting to see what additional dent the arrival of the Defender makes to that in 2020.
You can’t blame the drop in sales fully on the looks of the rear of the D5. If so, the Defender better watch out too, with that fugly rear end. So it’s more likely down to to reliability issues, value compared to other brands and overall looks that’s hitting D5 sales.
-
1
-
-
You won’t be seeing the new Defender in this new museum. Kind of says it all really. 🙂 -
5 hours ago, Mo Murphy said:
Off road my arse !
Maybe this is what they meant by off road Mo...
-
1
-
-
On 11/17/2019 at 9:33 AM, Snagger said:
I see it as a win - someone can produce something along the lines of what we love, and LR can’t stop them having abandoned the design and us.
👍 -
11 minutes ago, tuko said:
I agree, I don't think it looks bad at all, actually on my 39 year old series I want a textured look, but I do plan to thin it out 20% and use a gravity feed sprayer to give a less grainy look.
9 minutes ago, tuko said:You should be ok with 10% thinners, that is what I have used. You’ll get a light texture if you use a primer tip, 1.8/2.0. Use a something like 1.4, and flat back the primer and you’ll get a completely smooth finish like any other top coat, albeit super hard. I tried some test pieces on some ally plate and you could hit it pretty hard with a hammer or screwdriver without damage. It will certainly take some off road abuse ok.
I think for liners, upol recommends the Schultz gun to achieve the full textured finish as it gives better protection to shock impacts.
Remember that it contains isocyanates, so suit up, use gloves and an air fed mask, even when mixing up.
cheers, Steve
-
11 hours ago, smallfry said:
Well no, on the chassis its fine, but that not what I meant !
1 hour ago, Bowie69 said:Precisely!
Anywhere that can't be seen is perfectly fine
Not the best light, but again I think it looks ok...
I'm now going to have a nice relaxing cup of tea to calm the *#%! down.
Thoughts and musings on the new defender
in New Defender Forum (2020 onwards)
Posted
That’s why I posted Matt Prior’s review from Autocar. He’s at least driven off road a number of times and personally owns a Defender.