SmasherWebbs

I'm looking to fit something with a bit more lower back support and something to hold you in a bit more. I take it no one has tried to do this before?

Looking at what options i can have in the way of front seats in a defender. I do know SAAB 93 seats are a very close fit and can be made to fit but does anyone know of any others??

http://www.ldemporium.co.uk/ton-foldable-engine-crane-and-engine-leveler-p-1479.html?utm_campaign=googlesimple&utm_medium=product_search&utm_source=googlesimple bit of a bargin

Are you planning on removing the gear box at the same time? If so you will have to use a 2ton, one will just bend. And one with adjustable legs is worth every penny! It is more than possible with a normal engine lift and some STRONG rope around the gear housing and looped over to the single lifting point on the engine. And yes you will have to remove half the front end then push the landy back leaving the lot hanging. Best you always have someone in shouting distance just incase!!!!!!!

Looking for the little clip in nut things behind the door pillar for securing door hinge bolt. Just snapped one of the buggers off!!!

Thats the ones!!! Thanks

Is there a item number for the little plastic clips that hold the rubber arch in place on my 90?

If this doesnt open up a can of worms i dont know what will! I have a 300tdi 90 and im looking for a good (GOOD!) set of tyes that i can use: 1 on the motor way 2 off road without getting stuck in 6 inch's of mud 3 dont become to loud over 60/70ish 4 in the past i have found that the high end tyres dont last long i.e. pirrelli's i had for a hatch back only lasted 9 months due to the soft compound but they did grip like a gorrilas fist! The tax man has just given me a rebate so its all going on the landy before she finds something to spend it on!!

Had a look on google and the best i can find is a SIP Arc/Tig 200 amp for £450 http://toolstoday.co.uk/shop.php?sec=prod∏=77251&cat=557&load_page=SIP+Green+Weldmate+P208HF+TIG+%2F+ARC+200+%2F+180+Amp+Inverter+Welder+230V+-+05269 Anyone know of a better deal? I dont want a draper or a china knock off i need something to last!

You will be hard pushed to find a good one for less than £200. But here is a good quality German tool. http://www.ldsengineering.co.uk/index.aspx?pageid=340129&prodid=2180383 I have a few Bergen tools and there dam good

any photos??

I recently had 2 new door off them. Cheaper than most but do watch what your ordering! best to call them and have a chat about what you need and the cost. I almost ended up getting the wrong doors by ordering online. there web site is not all that clear There helpful and friendly guys

Think im going to wet myself

awsome Western where do you find this stuff? Are you half Russian or just on the black market!

making a start on updating the interior so best start with the wobbly broken plastic casing behind the wheel.

Thats the bugger! Ansome western

The little push up things.

Do you need to reuse it? If so either pullers or a hot oil bath. You might be lucky and find your local hire centre will have a good set of pullers that fit.

Welding it will make no more difference than it would to any other chassis but you would really want to remove all the galv where your going to weld on first. Unless you have a death wish. Using a good dust mask and a flapper disc on a grinder will do the trick in a well ventilated place! When it comes to protecting it after spray galv is not a touch on the real thing. However there are some good zinc paints out there.

Your going to have to either get wet or wait and use the multi meter. You will probably find its a bad connection somewhere or your not getting a earth.

Price is a bag of 100 on the link

Try a electrical resaler for rubber membrane gromits will cost pennys http://uk.rs-online.com/mobile/p/cable-grommets-grommet-strips/1614098/

Does it have an immobilizer?

You have the makings of an extreme hill climber. Strip the lot put a roll cage in, long travel shocks and I'm sure you will play with the electronics on the 4.2. Think you can squeeze around 250Bhp out of that? Ha

Will have to give them a ring monday!! And the harribo ring is in the post