nickliv Posted February 4, 2017 Share Posted February 4, 2017 Hi. I'm looking for the interior door trim for my early 110 rebuild, the 2 part trim pieces fell apart when I was removing them, I've got some which are complete, but not all of them. I believe the part number is CZA2259L. Looking online they're unavailable. Anywhere. Would a 3D scanning and printing service be a worthwhile avenue, or has someone got a carrier bag of these hanging around. I think I need another few bits of interior trim as well, but I'll only know when it all starts to go back in. It was a complete basket case, had had a few coats of olive drab applied by yard brush, biffs, knocks, holes etc, so it's not a faithful repro. 1 Quote Link to comment Share on other sites More sharing options...
simonr Posted February 5, 2017 Share Posted February 5, 2017 They look easily printable - so yes, if you cannot obtain some, scan & print. There are plenty of bureau services who will do both. However, it's not long until the Newbury Sortout - if you can find them anywhere, it will be there! Si 1 Quote Link to comment Share on other sites More sharing options...
neil110 Posted February 5, 2017 Share Posted February 5, 2017 A quick scan on www.thepart.com shows that several places have them in stock ranging in price from £1.25 to £2 1 Quote Link to comment Share on other sites More sharing options...
nickliv Posted February 5, 2017 Author Share Posted February 5, 2017 Hi. I've found some in Germany (I think) so have ordered a handful. Whether they are in stock or not, remains to be seen.... Quote Link to comment Share on other sites More sharing options...
neil110 Posted February 5, 2017 Share Posted February 5, 2017 (edited) If they don't have them in stock, Brown and Gammon are showing 12 and Moss europe are showing 50 in stock. Just out of curiosity is that a YRM repair section for the diagonal element of the "C" pillar? Edited February 5, 2017 by neil110 Quote Link to comment Share on other sites More sharing options...
SvBeek Posted February 5, 2017 Share Posted February 5, 2017 Do I see a Dutch license plate there on the picture? Quote Link to comment Share on other sites More sharing options...
nickliv Posted February 5, 2017 Author Share Posted February 5, 2017 (edited) Cheers Neil. Have bookmarked them, just in case.? SVbeek , it lived in the NL for a while, with the previous owners, but is back over here now. Edited February 5, 2017 by nickliv Typo Quote Link to comment Share on other sites More sharing options...
nickliv Posted February 5, 2017 Author Share Posted February 5, 2017 Hi Neil. The sill and the lower portion of the C pillar are indeed YRMs. Quote Link to comment Share on other sites More sharing options...
Orgasmic Farmer Posted February 5, 2017 Share Posted February 5, 2017 When I did mine I bought MG ones off Ebay for a couple of quid. Think I still have a spare just in case. Quote Link to comment Share on other sites More sharing options...
Maverik Posted February 6, 2017 Share Posted February 6, 2017 I wish I had thought about keeping the lift up door handles, I think they look pretty good on the early vehicles. Good look with the last leg, shouldn't take you long now to finish off, looking very smart. I'll keep an eye out for you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.