DC_ Posted May 2, 2020 Share Posted May 2, 2020 Hope you are all doing ok and keeping safe in these weird times!ย So as Iโm self employed Iโm currently doing hee haw work and still waiting on a help from the Gov ๐ย Anyhoo, I thought I might as well try my hand at repairing the 1987 110. The worst bits are the dreaded footwells and some bulkhead bits too.ย i know others could have done a better job but Iโm kinda chuffed how the offside went. Iโm currently onto the near side. Few pics for you to get your fix ๐ย Quote Link to comment Share on other sites More sharing options...
DC_ Posted May 2, 2020 Author Share Posted May 2, 2020 Near side up to today.... what ever day this is?? ๐๐ ย 2 Quote Link to comment Share on other sites More sharing options...
reb78 Posted May 2, 2020 Share Posted May 2, 2020 That looks tidy. Its a ****ty job to do but good to have it done! I have a new bulkhead for mine because I cant bring myself to do the repairs you have done! Now I cant motivate myself to do the bulkhead swap because I may as well do a chassis at the same time. Then I think I know what will actually happen and the 110 will get stripped to do a panel by panel re-spray and rebuild! Quote Link to comment Share on other sites More sharing options...
DC_ Posted May 2, 2020 Author Share Posted May 2, 2020 9 minutes ago, reb78 said: That looks tidy. Its a ****ty job to do but good to have it done! I have a new bulkhead for mine because I cant bring myself to do the repairs you have done! Now I cant motivate myself to do the bulkhead swap because I may as well do a chassis at the same time. Then I think I know what will actually happen and the 110 will get stripped to do a panel by panel re-spray and rebuild! Aye itโs a job alright Reb78 !! Iโm actually enjoying it. Learning lots and now not so scared of things like this than I used to be ๐ฑย if your chassis is in good nick maybe get on with the Bulkhead swap? But Iโd say make a start and the rest will follow ๐๐ Quote Link to comment Share on other sites More sharing options...
Mo Murphy Posted May 3, 2020 Share Posted May 3, 2020 ... and into the pit of eternal rebuild you will fall ๐ Mo Quote Link to comment Share on other sites More sharing options...
Arjan Posted May 3, 2020 Share Posted May 3, 2020 Looks good - nice job ! We have 2 chassis waiting here for the travel bans to be lifted so we can get them galvanized and start a rebuild... 1 Quote Link to comment Share on other sites More sharing options...
DC_ Posted May 3, 2020 Author Share Posted May 3, 2020 Also been blessed with the weather to get on with it. Cuppa in hand,ย breaky about to go on and then get stuck in. ๐๐ Quote Link to comment Share on other sites More sharing options...
Lightning Posted May 3, 2020 Share Posted May 3, 2020 Thatโs a fine job you have done there. Scary to see the corrosion behind those panels but l guess the vehicle is 33 years old. How many cars last 33 years with daily use and are still running? Itโs going to be good for another thirty years when you have finished. 1 Quote Link to comment Share on other sites More sharing options...
DC_ Posted May 3, 2020 Author Share Posted May 3, 2020 22 minutes ago, Lightning said: Thatโs a fine job you have done there. Scary to see the corrosion behind those panels but l guess the vehicle is 33 years old. How many cars last 33 years with daily use and are still running? Itโs going to be good for another thirty years when you have finished. Thanksย lightning, wasnโt able to see just how bad it was until I got the wing off. Offside wing I took off with the galvi inner wing still attached, but the nearside I separated them which was easier. I hope it does last a while after all this ๐๐ Quote Link to comment Share on other sites More sharing options...
DC_ Posted May 3, 2020 Author Share Posted May 3, 2020 Most of the morning spent pondering what the best route to take was.... in the end all the bad ish stuff cut out and also the really bad.ย IMG_4646.MP4 Quote Link to comment Share on other sites More sharing options...
DC_ Posted May 6, 2020 Author Share Posted May 6, 2020 Sitting on the deck in 22 ish degree sunshine enjoying a cold one after what was a longgg day on the rebuild. (I know not as big as some are doing)ย Itโs almost there and I reckon tomorrow itโll be test drive time. Fingers crossed ๐โ๏ธ๐บ๐ hope youโre all doing ok 2 Quote Link to comment Share on other sites More sharing options...
reb78 Posted May 6, 2020 Share Posted May 6, 2020 Very nice. Very satisfying job. I am having a beer with you. 1 Quote Link to comment Share on other sites More sharing options...
DC_ Posted May 6, 2020 Author Share Posted May 6, 2020 1 hour ago, reb78 said: Very nice. Very satisfying job. I am having a beer with you. Cheers !! ๐บ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.