Arjan Posted May 14, 2020 Share Posted May 14, 2020 Because I have 2 vehicles with a roll cage, most snorkels don't fit. This is very much what I'd like - with the well known Mushroom top... Is this D.I.Y ? or ...... Many thanks ! Quote Link to comment Share on other sites More sharing options...
Maverik Posted May 14, 2020 Share Posted May 14, 2020 I think Mantec supplied them at one point, 1997-1998 Camel trophy Defenders had them but on the other side. Quote Link to comment Share on other sites More sharing options...
missingsid Posted May 14, 2020 Share Posted May 14, 2020 This is the reinvented Mantec one. http://www.mantec.co.uk/productdetail.cfm?theProductID=3922DFCE-15C5-F4C0-99E8123D6B187B27 Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted May 14, 2020 Share Posted May 14, 2020 The nearest custom exhaust shop should be able to knock that up in 5 minutes. Quote Link to comment Share on other sites More sharing options...
Arjan Posted May 14, 2020 Author Share Posted May 14, 2020 "The nearest custom exhaust shop should be able to knock that up in 5 minutes."... We're talking France here.......... Not an option - sorry. I def. want the snorkel to stay inside the cage / body. Otherwise I could use bolt on versions.. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted May 14, 2020 Share Posted May 14, 2020 1 hour ago, Arjan said: "The nearest custom exhaust shop should be able to knock that up in 5 minutes."... We're talking France here.......... Not an option - sorry Not even online? It's a fairly simple shape. Postage would likely be prohibitive or I'd offer to run round to my local chaps with a measurement and get them to knock a couple up for you Quote Link to comment Share on other sites More sharing options...
Arjan Posted May 14, 2020 Author Share Posted May 14, 2020 Not really here...... In Holland : yes. In France : no.... Therefor I was wondering if there is something ready made... Otherwise I'll wait until I can travel again. Quote Link to comment Share on other sites More sharing options...
Escape Posted May 17, 2020 Share Posted May 17, 2020 Southdown do something similar. I had modified one for my previous P38 and plan to do the same again. On my Defender with a full external cage I had a simple straight pipe attached to the inside of the front hoop, connected through the bonnet with a piece of flexible. (As there was not enough room in the corner of the wing to get the positioning correct). Safety Devices was/is developing one to go with their cages. If it's available, you should be able to get it directly from Belgium (http://www.safetydevices.be/contact.php) to save a bit on shipping. Filip Quote Link to comment Share on other sites More sharing options...
UKARAUTO Posted June 7, 2020 Share Posted June 7, 2020 Hello That looks like the below part. https://ukarauto.com/body/11064-land-rover-metal-snorkel-ba2123am.html Can you give me model of your vehicle? This one fits 300TDI, TD5 & PUMA RH There is a different one for other models. Quote Link to comment Share on other sites More sharing options...
Escape Posted June 8, 2020 Share Posted June 8, 2020 Completely different, that's a standard side-mounted intake and wont fit with a rollcage, unless heavily modified. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.