BogMonster

Bit like a Freelander, Discovery Series 2 or Discovery 3 then? Vaguely sensible bumpers ended with the Discovery Tdi, everything since then (apart from Defenders of course) have been plastic one-piece things, the Discovery Tdi one was at least mostly made out of metal and if you trashed anything it was usually only the end caps which weren't too expensive. Both bumpers on my D2 are one piece plastic affairs and it's not very long since I saw one that had been removed by a single ditch crossing (not mine thankfully!)

Posted this yesterday afternoon but it seemed to disappear too.... I am using Outlook Express 6 for mail at work and I keep all my old emails, now about 10,000 or so I suppose, for future reference - however I archive them off into other folders to keep the Inbox relatively fast loading (usually keep the current year's messages in the Inbox and have a folder for 2003, folder for 2004, etc etc) The reason I do this is so I can go up to the Local Folders (top of the folder tree) and search by senders email address and it turns up everything from them which makes things easy to find. However, in the last few months the computer will turn up a list of messages in the "Find" window but when you try and open the message it says "Message could not be displayed Outlook Express encountered an unexpected problem while displaying this message. Check your computer for low memory or low disk space and try again." This is rubbish as there is plenty of disk space and the computer was only recently upgraded from 128mb RAM to 384mb, and it used to work perfectly well with 128mb (the problem didn't start at the time of the memory upgrade AFAIK) If I note the folder that the message is stored in, and the date, I can navigate to the location of the message and open it with no problem, just can't open it from the "find" window - which is a PITA because it makes it very hard to check through a heap of messages when you are looking for something any thoughts please? I can't find anything on the Microsoft knowledge base nor Google is there a practical limit on how many emails Outlook Express can cope with and am I about to hit it? I can't find anything published on this and I can't believe I have anywhere near as many emails as some people must have! Thanks Stephen

Loadage by the sound of the above discussion is almost a measure of "rubbishness" (the amount that a spring can support without being in danger of permanent deformation) So the "loadage" of a certain brand of orange springs everybody loves, is probably about 50lb It would be a v complex calculation though, to try and work out the max load on any individual spring under cross axle conditions on a steep uphill/downhill slope where quite possibly a large proportion of the vehicle weight is effectively being supported by the spring on one corner Also does loadage refer to the "average load" at rest or "peak load" e.g. if you hit a trench at 50mph and bottom the suspension out against all the bump stops With leaf springs if you do that you tend to break them (especially on things like Suzuki SJs) but I don't recall ever hearing of a coil spring breaking under those conditions....?

I hate to say it but apart from the soiled-nappy colour scheme I sort of like it I must admit though, I couldn't immediately spot the jacking point either....

stops the wipers from squeaking

I just wind the cable in until there's a couple of feet of slack, hook the hook onto its retaining loop under the bumper, and then wind the rest of it in with hands clear until its tight. No need to put fingers anywhere near the cable - and if you do need to guide it over roller fairleads or something (mine is a hawse so no problem), you can just hold the cable between finger and thumb so no danger of trapping pinkies Mangling fingers is a bit like treading on a garden rake and having it bash you on the back of the head, you really only have to watch what you are doing, to not do it I like the radius arm bush idea Les

Castrol Tection 15w40 in the engine Currently I use MTF94 in the gearbox though I have some Difflock MT75 oil to try in there at some stage I have also used Castrol Dexron IIID (a type of ATF) in my old 90 which was just as good as the stupidly expensive LR oil which IMHO makes no difference to the gearchange Castrol EPX80w90 in the t/box and diffs Stupid LR sloppy grease in the swivels because there are no drain bungs to put oil in Being a newish one my 90 has the funky hot pink OAT antifreeze in it that smells of rotten fish, though as the engine and cooling system is the same as all other 300Tdis I think I would probably go back to normal antifreeze if I ever had to change it

I've just never seen any point in changing from the std shock turrets, unless you need different length ones or want to fit twin shocks or something. I've never seen a turret break except from old age/corrosion which can affect anything, the only bit that is a weak point is the stupid retaining ring which holds it on, though even those only seem to break when you try and take it off! I suppose it might be a different story if you are racing or something. I suppose if somebody has spent a zillion quid on some fancy shockers and value for money dictates that they need people to be able to see their new acquisition then there might be a reason for it

fair enough point I'm not in my right mind! wibble PS. anybody who wants to be left my V8 in my will after I get run over by the Moon a week on Thursday please send me an inscription on a tablet of seaweed carried this way by a passing gibbon

I didn't see that but I think it means "Land Rover of Brazil", presumably "do" is Brazilianish for "of" or something?

It is basically the same ECU as a Td5 Defender (just some programming differences) so the plugs etc will be the same as the lead you have seen, if the Defender extension lead is not long enough I assume one end is male & one female so you could join a couple of them together? Or buy a D2 V8 then the ECU is in a nice warm snuggly place to start with just as well with the cost of the bluddy thing!

A chap I know did it about a year ago, over-run on the winch mangled some fingers (XD9000i) If you imagine taking your finger and battering it 8 or 9 times with a 7lb sledgehammer that was kind of what it looked like afterwards, nail and stuff was gone and the rest was just a blue/black mess. I think it's more or less recovered now, not sure as I haven't seen him for a while. I've had a "little nip" and learned from the experience

Not really relevant to solving your problem but one of mine lives on the roof and I still have the back door carrier if I need to take an extra spare (though I can carry a third one also on the roof if required)

I am happy with "Good brand" filters i.e. Cooper/Crosland etc but not "any old brand" and definitely not "unbranded" - if somebody won't put their name on something I ain't gonna trust it . I have come across problems with non-gen fuel filters blocking prematurely, where Gen ones don't (our fuel here is "a bit variable in quality") but on the whole the good brand name ones are fine. Suspension bushes I will only ever use Genuine as experience has shown that non genuine can be (and often are) absolute rubbish. New set of shocker bushes I fitted that were totally shot in about 150 miles, for example... I also only use genuine for bits that are hard to get at or have expensive consequences if they break e.g. timing belt (though I think Dayco actually make the Genuine ones?), some oil seals (such as rear crank, and the ones under the timing cover). Exception to that rule is clutches, decent branded clutch kits are fine (Borg & Beck etc) Many other bits such as Wabco vacuum pumps, Bosch starter motors, Magneti Marelli alternators, Lockheed brake servos, Timken bearings, to name but a few, are the same part as Genuine but without that bluddy expensive box that the LR ones come in! In some cases (Bosch starter motors for example) the part actually comes with a Land Rover logo branded into it and you don't get much more genuine than that

When I said D2 I was meaning the "early" D2 headlights 99-02MY not the 03MY> four eyed ones. The early ones are, AFAIK, the same shape and fitting as the 300Tdi ones (ie a straight swap for those) they just look nicer IMHO I don't like the new four eyed headlights at all. If you need some photos of how the S2 ones in mine fit in/fix on I could do some if reqd.

That's four words Hot - and also hot for gearbox/tbox/axle oils if possible as well, quicker, you get more of it out if v thin and it also takes all the gunge out with it

Why don't you go the whole way and use the lights off a Series 2 Disco, the "shadowed" edges look nicer Not sure what else you need sorry

Yes!! It is the one and only time I am a football fan, when we are beating the Argies, otherwise I can't stand the game

You're repeating yourself Nige As I've said before there's nothing wrong with it, its just a different shape to when it left the factory. Only a couple of weeks since I last used it in fact - on the Blue Mountain trip (better than being pulled out by a Pajero, which in any case was stuck in the same ditch right next to me, and all the others were wetting themselves at getting me stuck in almost exactly the same spot as last time we were in that area ) The limitation is the spade size not being big enough for v soft ground - but I worry if I doubled the spade size I'd start breaking something else, hence the interest to see what this "tractor proof" (mwahahahahahahaha evil cackle) one looks like Moglite is gonna be along with a stick soon as we seem to be drifting eversoslightly OT again Drifting back on topic, and accepting that I'm not going to do the mod anyway, what's the verdict on portal axles for very soft ground, or are they more a tree stump hopping sort of thing? I can see they would help, as you wouldn't be dragging diffs etc until much later, but I can also see you might end up "a lot more buried" if you ventured into ground that didn't have anything solid for 6 feet below ground level?

Bogbuster Anchor Stress Testing And Rapid Destruction Ltd at your service. Free anchor elongation and 3 dimensional spade bending services available Good acronym too - must work on the corporate logo

DeforestationDicky

Be interested to see some pictures of that, living as I do in a land with no trees and lots of peat bogs Be interested in a price too.... I can pull both my anchors out at the same time (chained together) with the Milemarker without any bother so anything bigger is definitely of interest

We will remember them http://www.sama82.org/

Richard you need to amend your signature - clearly the bit about going anywhere slowly is not correct if you are going down a hill then the bit about noisily and expensively might be right by the time you hit the bottom though?

I think what Andy was saying is that a Td5 has been proved to be capable of a 60% or so power and torque hike so those sort of increases are possible. Me, I'd be happy enough with an ordinary 2.8!