minivin

cheeky boogger have used tie wraps for the moment!

just had a look over the module, it's a Britparts bit but unfortunately no markings

Sorry Mehetabel, should have said air pipes and not left it to you thinking water pipes Cheers Jon, The hose is good with Craddocks, unfortunately they don't know the clip on their website, looks like a visit to Otton's of Salisbury tomorrow to plave an order

Anyone know which terminals are input and which are output? Now if I was designing a circuit with one set blade, and the other socket, I would have the input as the blades (pins) and the outputs Sockets, that way if the input wire socket came off it could not short due to the insulation over the contact. Without breaking out a powersupply, multimeter and possibly blowing the ickle device up by routing current through it backwards, would anyone like to agree with my theory

oh well, one more paying entry fee so who cares?

urgh! only good for Johnie Foreigner

Withams finest That be bog standard, so what does that make my newly restored, stainless where possible, powder coated and wax oiled truck worth

There's a sealer we use in the aircraft industry called PRC, also called gorilla snot by those on the hanger floor, seals fuel tanks and anything that you don't want a liquid getting past, not sure of the part number at present but if you could get it privately that would stop any fluids getting in Sea King helicopters also around the engine bay electrics use ordinary silicon grease shufted into and around the connectors, never seen any corrosion problems or other failings on these connectors due to this process

hmmmm..... even more reason to hate the Frence

Lets see whats on ebay: 10Amp 24->12 20Amp 24-12 6Amp 8Amp Another option is to look into Army surplus or truck part suppliers, ministry uses 28/24V and trucks use 24V so they may have better prices or range of items

can't see her being worth much at her age, but she's my putty tat so that don't come into it

oh go on then! Lucy, 20 YO commonal garden moggy, spends most of the time either sleeping or purring at me

Anyone know the part number for the screw-clips that hold the hose to the heater matrix and the blower assembly, aint got a bloody clue at present from teh parts list, Paddocks or Craddocks websites

"I WAS TOLD WHEN I BOUGHT IT, IT WAS BUILT by bored squaddies who had too much Absynth the previous night AS A PROJECT" more like

and the shed <sighed> with relief

Ahhhh, just that it seemed like a thing that V8 owners do and having looked in your ickle shed

User twoandaquarter....... Bordon....... Mr. White is that you??????

I'm guessing 1/4"

easy to pass a quick quip, than say the meaning...... aiy!

i expect so, he's bound to want summat, mr spendy, remember? ok, I'm keeping away from tyres this time

bit ****e, any idea why the load didn't spread correctly?

well if you buy a set of tyres, you could use me as the dowel to hold them together and roll them along ah, will Ash be there

should be, doubt i'll be buying stuff to put the 109 back on the road, more V8 and LPG conversion-wise now

Thinking of bunging two into each of the ol' military jerry can stores on my 109 and maybe another at the side of the tub, still thinking on sizes et cetera

Anyone got any recommendations on LPG tank supplies, parts, kits et cetera, Chris Perfect prices are interesting to say the least, would like to get a comparison before I look too deeply