Smego Posted July 5, 2018 Share Posted July 5, 2018 I have a mantec 200tdi snorkel and the bendy 70mm plastic bit that joins the 2 rigid pipes has split and needs replacing, anyone know what I can use? I thought a bit of rad pipe might work but it just collapses at the bend, have so far not found anything both strong enough and flexible enough to work. Quote Link to comment Share on other sites More sharing options...
Arjan Posted July 5, 2018 Share Posted July 5, 2018 Why not ask Mantec ? Quote Link to comment Share on other sites More sharing options...
Ed Poore Posted July 5, 2018 Share Posted July 5, 2018 48 minutes ago, Arjan said: Why not ask Mantec ? Thought they went bust. Flat dog took bought the rights I think. Quote Link to comment Share on other sites More sharing options...
Arjan Posted July 5, 2018 Share Posted July 5, 2018 http://www.mantec.co.uk/ Give them a call and ask.. Quote Link to comment Share on other sites More sharing options...
Glue Posted July 5, 2018 Share Posted July 5, 2018 This Bit? HTH Quote Link to comment Share on other sites More sharing options...
Landrovernuts Posted July 6, 2018 Share Posted July 6, 2018 If it is the shorter version of the above, i found it was the same as a 3.9 V8 hotwire air flow meter to plenum bendy pipe. Toby Quote Link to comment Share on other sites More sharing options...
Smego Posted July 6, 2018 Author Share Posted July 6, 2018 I knew Mantec had gone bust but didn't know there was someone making their bits. That tube looks good but I need one about 250mm will search further now I have that as a start point. Thanks all. Quote Link to comment Share on other sites More sharing options...
Smego Posted July 6, 2018 Author Share Posted July 6, 2018 19 hours ago, Arjan said: Why not ask Mantec ? Oops quoted WRONG post.... Quote Link to comment Share on other sites More sharing options...
Smego Posted July 6, 2018 Author Share Posted July 6, 2018 Mantec type company is shut down for the summer break Quote Link to comment Share on other sites More sharing options...
Smego Posted July 6, 2018 Author Share Posted July 6, 2018 7 hours ago, Landrovernuts said: If it is the shorter version of the above, i found it was the same as a 3.9 V8 hotwire air flow meter to plenum bendy pipe. Toby John Craddock say only 65mm internal dia Quote Link to comment Share on other sites More sharing options...
Arjan Posted July 6, 2018 Share Posted July 6, 2018 Like France - about to close for a month.... Quote Link to comment Share on other sites More sharing options...
Smego Posted July 6, 2018 Author Share Posted July 6, 2018 17 hours ago, Glue said: This Bit? HTH Wondering if I got this and either cut the downpipe shorter or cut this and tried to clamp it? Quote Link to comment Share on other sites More sharing options...
Jon White Posted July 7, 2018 Share Posted July 7, 2018 22 hours ago, Smego said: Shut down completely till 23rd July. what sort of company does that these days? You’ll probably find it’s a one man band, not a large company - most specialist suppliers are these days. Hence they shut down when the go on holiday. also some shut down to ensure that their annual turn over stays below the VAT threshold so that they don’t have to go VAT registered. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.