Popular Post ashtrans Posted May 18, 2021 Popular Post Share Posted May 18, 2021 On 5/15/2021 at 4:16 PM, Snagger said: Ashcroft don’t make Salisbury ATBs, We decided to make some about a month ago, will be available in about 3-4 months, 4 1 Quote Link to comment Share on other sites More sharing options...
uninformed Posted May 19, 2021 Share Posted May 19, 2021 On 5/17/2021 at 2:31 AM, Sigi_H said: I like to go up steep hills in reverse. If you get stuck, it is easy to go down forwards without the risk of coming sideways and roll. So for me my front locker is the right choice even in this case 👍🙂 My CVs and shafts in the front are Tibus parts. This and the pegged Ashcroft 100% locker have improved the entire front axle for sure. I hope it is now as strong as the Salisbury in the rear. I totally agree with your reasoning for your needs. as far as differentials go, hemisphere, side gear strength etc, a built Rover will never be as strong as a stock Salisbury. As much as some gurus bang on about the main difference is the cross pin and it being 4 planet gears instead of 2, it’s that but mostly combined with shear size. Then not only is the crown wheel and pinion much bigger, the Sals is a better design as far as strength is concerned. This does not take away from the improvements you have made to your front assembly. Quote Link to comment Share on other sites More sharing options...
uninformed Posted May 19, 2021 Share Posted May 19, 2021 19 hours ago, ashtrans said: We decided to make some about a month ago, will be available in about 3-4 months, Good stuff 👍 Quote Link to comment Share on other sites More sharing options...
Snagger Posted May 24, 2021 Share Posted May 24, 2021 On 5/18/2021 at 4:17 PM, ashtrans said: We decided to make some about a month ago, will be available in about 3-4 months, Fantastic! I was looking at the Quaife otherwise, as I want as close a match as possible to one of yours in the front. I presume it’ll have the six scroll gears per side like your existing type and the Quaife. Is it a limited run, or will it be available long term like most of your range? Any idea on price yet, and would a Dana60 4.1 gear set fit it? If not, I’ll have to keep my 4.71 set and beg you for a spacer ring! 1 Quote Link to comment Share on other sites More sharing options...
Arjan Posted May 24, 2021 Share Posted May 24, 2021 And what sort of money will they be you think ? Quote Link to comment Share on other sites More sharing options...
Anderzander Posted May 27, 2021 Share Posted May 27, 2021 Please make a 10 spline atb ... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.