LR90 Posted May 2, 2007 Share Posted May 2, 2007 How did you get your landy under that door? Quote Link to comment Share on other sites More sharing options...
Warthog Posted May 2, 2007 Share Posted May 2, 2007 He may of used this technique Upped this piccy a few times now, but its worth a chuckle..............Mini rims, with insert with LR PCD holes. Quote Link to comment Share on other sites More sharing options...
LR90 Posted May 2, 2007 Author Share Posted May 2, 2007 I've seen it done with 16" alloys, no tyres and some boards, but its not the most convenient method. Quote Link to comment Share on other sites More sharing options...
LandyManLuke Posted May 2, 2007 Share Posted May 2, 2007 I have to take my tyres down to about 10 psi to get the 90 into the garage. i have about 1/4" to 1/2 clearance. Once the 90's in, i blow the tyres up again, and i've got about 12" clearance, been thinking about getting a roller door. Picture showing the 90 and a full size sheet of ply.... Quote Link to comment Share on other sites More sharing options...
Orange Posted May 3, 2007 Share Posted May 3, 2007 I'd move the ply - you'd have alot more room to work!! Quote Link to comment Share on other sites More sharing options...
western Posted May 3, 2007 Share Posted May 3, 2007 About time you cleared the garage out Luke & gave the 90 more space to breathe Quote Link to comment Share on other sites More sharing options...
LandyManLuke Posted May 3, 2007 Share Posted May 3, 2007 I'd move the ply - you'd have alot more room to work!! The 90, and the ply, were in the garage as i was making a new bit of dash, there was plenty of room once i'd cut into the ply and moved the big bit out of the way! it was £13 for a whole sheet, or £9 to have a half cut, no brainer as far as i was concerned. going to use the rest to panel out the hardtop. It's worse than that at the moment, no 90, but a 50gal oil drum BBQ, and another drum + frame in-build. Quote Link to comment Share on other sites More sharing options...
Daan Posted May 3, 2007 Share Posted May 3, 2007 The quick answer is: with 200 kg of concrete in the back. It touched, but it did go. However, recently I modified the roof: it now sports a 90 flat roof, which is lowered by 60 mm. Becasue its a flat roof, it is also 20 mm lower to begin with, bringing the height 80 mm lower. It fits beautifully to the garage now. I already had this conversion before, it is on the last picture (with bonnet deep water), but I lost it when I rolled it. So on the picture with the garage, its with a standard s3 roof. Since I bought this house, I reinstated the lowered roof so it fits in the garage with no hassle. I will make some more piccys of the lowered roof this weekend. Previously, I used the rim solution, 2 old rims on the back axle was enough. It gave nice stripes on the conrete, but this was a hire house anyway . Daan is spelled with 2 a's by the way.. Daan Quote Link to comment Share on other sites More sharing options...
nige90 Posted May 3, 2007 Share Posted May 3, 2007 Tyres deflated here as well, but only when the ragtop is on, with the hardtop it just fits. Quote Link to comment Share on other sites More sharing options...
bill van snorkle Posted May 4, 2007 Share Posted May 4, 2007 The quick answer is: with 200 kg of concrete in the back. It touched, but it did go. However, recently I modified the roof: it now sports a 90 flat roof, which is lowered by 60 mm. Becasue its a flat roof, it is also 20 mm lower to begin with, bringing the height 80 mm lower. It fits beautifully to the garage now.I already had this conversion before, it is on the last picture (with bonnet deep water), but I lost it when I rolled it. So on the picture with the garage, its with a standard s3 roof. Since I bought this house, I reinstated the lowered roof so it fits in the garage with no hassle. I will make some more piccys of the lowered roof this weekend. Previously, I used the rim solution, 2 old rims on the back axle was enough. It gave nice stripes on the conrete, but this was a hire house anyway . Daan is spelled with 2 a's by the way.. Daan Yes Daan I'd like to know more about your lowered roof as I want to do mine in the future. I originally built my internal cage 3 inches lower in readiness for this future modification. Bill. Quote Link to comment Share on other sites More sharing options...
Daan Posted May 6, 2007 Share Posted May 6, 2007 Right then, the lowered roof. I did replace the standard s3 roof with a modified defender 90 flat roof. There are a couple of reasons for using a 90 roof: First of all the absence of the ribs makes it 20 mm lower to begin with. Secondly, in order to have enough headroom, I effectively needed to move the slope of the roof forward, so that your head is exactly at the highest point. Since a 90 roof is 4 in longer, you achieve this by shortening the roof at the front by 4 inches. You need a flat roof without alpine windows, since the cut would go straight through these. The conversion is pretty straightforward, but as usual, takes more time than you thought at the start. Basically cut off the gutter and remove the gutterlip from the gutter. Create a new lip on the bottom of the roof (just fold over the edges of the roof using a plank of wood and a plastic hammer). The area around the rear door is a bit harder to achieve, but can be done by cutting a bit of wood in the right shape and folding around this. The front of the roof is created by folding the roof round to create a channel which bolts onto the s3 roof. Once this is done, you can rivet the old raingutter back on. In the latest reincarnation I cut the raingutter lip away, and fitted some alu box section instead, these are my tree bars. I think they are pretty nicely integrated this way. The endresult is 80 mm lower than standard, which is good for fitting in the garage. My main reason for doing it originally was clearance to trees in the jungle. It worked very well for this. I still have to add the external roll cage, which is waiting for a new tube to be bended(It got mashed when i rolled it). To add more headclearance, I removed all the internal channels, especially around the drivers head, and to add strength back in, the roof is tied to the rollcage in a couple of places. The weight of the roof reduced by 10 kg (compared to the s3 roof). I also added lexan windows for weightsaving reasons. I hope the pictures make things a bit more clear, I can imagine the above story doesnt make sence without them.. It clears the garage lovely! Daan endresult: Quote Link to comment Share on other sites More sharing options...
bill van snorkle Posted May 7, 2007 Share Posted May 7, 2007 That looks great Daan, I had thought about simply cutting the top 3 inches of the rooflid off and making a vinyl cover but I think I will follow your lead first but with the series lid. If I make a hash of it I can always go to the vinyl idea later. Bill. Quote Link to comment Share on other sites More sharing options...
Les Henson Posted May 7, 2007 Share Posted May 7, 2007 That's a very tidy job Daan. Les. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.