TJ101 Posted January 12, 2008 Share Posted January 12, 2008 All A bit of help please,, Finally getting round to fitting the Military/Wolf doors to the Hybrid I have a couple of r/hand ones ?? with 2 types of catch !! and would prefer to fit the top type, with the safety catch, but not too bothered which,, the lock barrels would be useful ?? what i am looking for is part number or supplier for the locks, as well as the door strikers to match Unless someone has a left hand one,,, looking for a good home Quote Link to comment Share on other sites More sharing options...
TJ101 Posted January 13, 2008 Author Share Posted January 13, 2008 Hi Mods had a brain fart !!! can someone move this into Defender forum, rather that Discovery, Quote Link to comment Share on other sites More sharing options...
PaulMc Posted January 13, 2008 Share Posted January 13, 2008 what i am looking for is part number or supplier for the locks, as well as the door strikers to match All the bits are listed here - http://defender110.nightmail.ru/Extracts/Split%20Doors.pdf All the usual suspects should stock them, they're standard late Series III / early 110 parts, in fact the RH door handle and catch are exactly the same parts as fitted to 'safari' rear doors. Paul. Quote Link to comment Share on other sites More sharing options...
TJ101 Posted January 13, 2008 Author Share Posted January 13, 2008 Thanks Paul Yep,, them be the puppies much appreciated Thank you Mod,,for moving the post,, whoever you were Quote Link to comment Share on other sites More sharing options...
western Posted January 13, 2008 Share Posted January 13, 2008 Must have been Jim A or BM, Me & Mog can't move stuff from other forums. Quote Link to comment Share on other sites More sharing options...
TJ101 Posted January 13, 2008 Author Share Posted January 13, 2008 Well that will be BM then,, i bet good old e-blag,, bough a lock and 2 stickers already,, Just short of the captive bolt/screw plates now,, if i am going to do the job right !! Stuck with the anti-burst, hopefully the lock barrel will transfer across ?? Quote Link to comment Share on other sites More sharing options...
Mo Murphy Posted January 14, 2008 Share Posted January 14, 2008 Well that will be BM then,, i bet good old e-blag,, bough a lock and 2 stickers already,, Blimey Tim, you are easily distracted ! You were supposed to be looking for strikers !!!!!! Mo Quote Link to comment Share on other sites More sharing options...
JST Posted January 14, 2008 Share Posted January 14, 2008 Tim - if they fit the holes in the doors for the lock then let me know i need to change mine really. i have the ones shown in the bottom of your pictures. Quote Link to comment Share on other sites More sharing options...
Mark90 Posted January 14, 2008 Share Posted January 14, 2008 Series anti burst locks like the top of the pic will fit the holes in the doors. That's what I put on 90 and drilled holes as the doors I aquired where for the standard series locks like bottom of pic. I might have a lock and striker kicking around. Quote Link to comment Share on other sites More sharing options...
TJ101 Posted January 14, 2008 Author Share Posted January 14, 2008 Tim - if they fit the holes in the doors for the lock then let me know i need to change mine really. i have the ones shown in the bottom of your pictures. ?? well they both fit the r/hand door , best have a look on Friday James Quote Link to comment Share on other sites More sharing options...
TJ101 Posted January 14, 2008 Author Share Posted January 14, 2008 Series anti burst locks like the top of the pic will fit the holes in the doors. That's what I put on 90 and drilled holes as the doors I aquired where for the standard series locks like bottom of pic.I might have a lock and striker kicking around. Yep, though you hand the anti-burst ones Mark ! and know James has the earlier? type as above .. both locks fit the right hand door i have ,, mmm, may relive you of that spare one you have Mark Quote Link to comment Share on other sites More sharing options...
Mark90 Posted January 14, 2008 Share Posted January 14, 2008 Tim if you want it it's yours, but I've just been out and checked and it is also a right hand fittment (these are most common as they are found on the back doors of 90/110) and there is no stricker, must have used that when fitting the side opening tailgate. Quote Link to comment Share on other sites More sharing options...
A Twig Posted January 14, 2008 Share Posted January 14, 2008 Slight side-track, but I need to replace a door on my 90, where does one locate Wolf doors? Are they a straight swap in for normal doors? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.