Astro_Al Posted April 15, 2008 Share Posted April 15, 2008 Howdy folks. I only have a crappy torque wrench and I want something a bit more betterer. What do you have and how do you find it? Good ones / bad ones / cheapo / expensive - what are your experiences? Cheers for all inputs. Al. Quote Link to comment Share on other sites More sharing options...
Philj Posted April 15, 2008 Share Posted April 15, 2008 One of the supermarkets (ALDI/NETTO can't remember which one) has one on offer this week for a tenner - no idea how good there are, SWMBO is picking one up for me tomorrow. Also (sorry, I am about to hijack your thread!), I have heard people say they have had theirs calibrated - how is this done ? Quote Link to comment Share on other sites More sharing options...
LandyManLuke Posted April 15, 2008 Share Posted April 15, 2008 Halfords own, was given to me as a present, it's been fine for me, i could do with one with a lower range, the halfords one starts at quite a high torque. Quote Link to comment Share on other sites More sharing options...
istruggle2gate11 Posted April 15, 2008 Share Posted April 15, 2008 Halfords own, was given to me as a present, it's been fine for me, i could do with one with a lower range, the halfords one starts at quite a high torque. I have the mid range halfords model and it seems to perform as it should, they do offer 3 sizes with varying degrees of strength / drive size. They also won "best buy" recently in Car Mechanics magazine, apparently, they are made in the uk by a very well known and respected toolmaker! Quote Link to comment Share on other sites More sharing options...
LandyManLuke Posted April 15, 2008 Share Posted April 15, 2008 I'd heard they, and halfords professional tools, were made by Britool, who are now really Facom? Can anyone confirm or rubbish that? Quote Link to comment Share on other sites More sharing options...
Mark Posted April 15, 2008 Share Posted April 15, 2008 Halfords Pro always used to be Sykes-Pickavent. The lines between the decent names are all fairly blurred these days anyway... I had a Clarke one until recently when I replaced it with a halfords pro one, and have been very pleased with it. Cheers Mark Quote Link to comment Share on other sites More sharing options...
clbarclay Posted April 15, 2008 Share Posted April 15, 2008 I was given a Britool 1/2" drive which is very nice, though could do with a 3/4" and a 1/4" as well to cover all likely torque settings and it has a fixed rather than ratcheting end which has its advantages and disadvantage. One tool rearly covers all situations. One question about cheap torque wrenches and ones with greater torque ranges is just how accurate they are and how bunched up the scales are? Quote Link to comment Share on other sites More sharing options...
BigMac1 Posted April 15, 2008 Share Posted April 15, 2008 I've got a 1/2 sealey one that was on offer from one of our parts companies. Cost me about £16, I've used it 5 days a week, about 3 to four times a day depending on what jobs i've got and it's been great. I've had it about 8 months, being calibrated about 3 months ago. Not sure what they do to calibrate them as I've never asked or wtahced, will do next time. Last I heard about Halfords tools, they were made by Facom, who I *think* own/are Britool aswell. Either way Halfords Pro range is excellent, try and get yourself a trade card to save a few ££'s, had mine for about 3 years and saved anything from £2 to £50 depending on what you spend, but well worth it. Mick Quote Link to comment Share on other sites More sharing options...
western Posted April 15, 2008 Share Posted April 15, 2008 Al, one word --- NORBAR good quaility & accurate, had mine since 1982 IIRC & still accurate when tested on the torque analyser at work. Please contact Norbar for the most appropriate Distributor for you to contact: Norbar Torque Tools Ltd Beaumont Road Banbury Oxfordshire OX16 1XJ UNITED KINGDOM Tel:Â + 44 (0) 1295 753600 Fax: + 44 (0) 1295 753609 Email: enquiry@norbar.com Torque Wrench Service & Calibration Multiplier Service & Calibration Electronic Service & Calibration Nationally Accredited Torque Calibration Lab Quote Link to comment Share on other sites More sharing options...
freeagent Posted April 15, 2008 Share Posted April 15, 2008 I've got a large Halfords pro one, very good, no complaints... and for smaller jobs a Norbar smaller jobbie, also top stuff.... Quote Link to comment Share on other sites More sharing options...
Night Train Posted April 15, 2008 Share Posted April 15, 2008 I have a very old Sykes Pickavent one which served well and also a Halfords one. I haven't a clue how accurate they are though but I have used both to rebuild engines in the past without any problems. On the other side of things I have also used a 3' scaffold pole and a 5' scaffold pole on the end of a 3/4 drive T bar. Quote Link to comment Share on other sites More sharing options...
Les Henson Posted April 16, 2008 Share Posted April 16, 2008 I use a Halfords Torque wrench, but have owned Norbar in the past, which are also very good. Les. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted April 16, 2008 Share Posted April 16, 2008 Halfords pro - very nice and I believe they've got a lifetime guarantee. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.