carlosbeldia Posted November 16, 2011 Share Posted November 16, 2011 Hi, I need some help. I'm trying to locate the external mirror that this car have. Is not a normal Defender one, it has a more inclinate arm, so you can see all the mirror using the Series hinge. I think the arm is longer than the Defender one, but it also have a certain inclination degree. Can anybody confirm me the part number for it? thanks in advance. Quote Link to comment Share on other sites More sharing options...
ejparrott Posted November 16, 2011 Share Posted November 16, 2011 Wolf varient? Quote Link to comment Share on other sites More sharing options...
discomikey Posted November 16, 2011 Share Posted November 16, 2011 was it the bedford vans which had nearly identical (if not identical) mirrors to that on a defender? Quote Link to comment Share on other sites More sharing options...
Happyoldgit Posted November 16, 2011 Share Posted November 16, 2011 Like these my link ? Quote Link to comment Share on other sites More sharing options...
carlosbeldia Posted November 16, 2011 Author Share Posted November 16, 2011 I think those are Happy, do you have the part number? the large arm ones they sell in LRSeries are straight ones..... Quote Link to comment Share on other sites More sharing options...
western Posted November 16, 2011 Share Posted November 16, 2011 might just be because the longer arm is folded in towards the door instead of being straight out at right angles, that makes the long arm look bent, the wide body Sherpa vans had the long mirror arms from new. IIRC they are a Britax or Wingard made item. Quote Link to comment Share on other sites More sharing options...
Landy-Novice Posted November 16, 2011 Share Posted November 16, 2011 part number is RRC8443 there from the wolf, i think Ralph is right, its just the picture that make it look more bent. Quote Link to comment Share on other sites More sharing options...
disco2hse Posted November 17, 2011 Share Posted November 17, 2011 May be an older model Spafax mirror? http://www.spafaxmir...ccessories.html More here: http://www.thetoolboxshop.com/vm3-spafax-205mm-x-150mm-unbreakable-lens-wide-angle-rear-view-mirror-commercial-3600-p.asp Quote Link to comment Share on other sites More sharing options...
carlosbeldia Posted November 17, 2011 Author Share Posted November 17, 2011 No, the arm is bent, it's the mirror from my girl's car.... thanbks a lot for the part number.... Quote Link to comment Share on other sites More sharing options...
western Posted November 17, 2011 Share Posted November 17, 2011 haven't seen any new arms that are pre-bent, only the straight ones that have been mentioned above. Quote Link to comment Share on other sites More sharing options...
western Posted November 17, 2011 Share Posted November 17, 2011 part number is RRC8443 there from the wolf, i think Ralph is right, its just the picture that make it look more bent. as in this link with a photo. http://www.lrseries.com/shop/product/listing/10427/4234/3/RRC8443-EXTRA-LONG-WOLF-XD-MIRROR-ARM.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.