Jump to content

ciderman

Settled In
 View Profile  See their activity

  • Posts

    2,452

  • Joined

  • Last visited

 Content Type 

Everything posted by ciderman

  1. ciderman
    My membership card arrived today , Even got the MSA logo on it
  2. ciderman
    Ooo Nice twist , Are the shafts bent , If you roll them on a flat surface , Jase
  3. ciderman
    Night club ?? I heard its was a cattle market
  4. ciderman
    To be honest John , The way our trucks are changing lately the bolt on thing is probably best for removal and refit .
  5. ciderman
    Only at your events James , Plastic coated trees here in Somerset /Devon Something like square peg ,round hole
  6. ciderman
    I guess it depends on how well the powder coating is applied , I blasted the powder coating off my Mach 5`s with Jblast and it took about a whole bag to do each wheel .I had a small nozzle fitted though .
  7. ciderman
    Shot blast is going to be the easiest option , Espesialy if you get someone else to do it , If your going down the mechanical removal or blowtorch route make sure you have some breathing apperatus as that **** gives of some nasty toxic fumes .
  8. ciderman
    Nicely put sir .
  9. ciderman
    Bish that reminds me, How much did you pay P&P for your carrage on your front hoop ? I picked up a £35 bill for carrage of a set of flat pack wing bars
  10. ciderman
    Be interested how John . MSA specs of course ,
  11. ciderman
    If you want something on a Sunday Im sure a phone call to Adrian will have it sorted .
  12. ciderman
    It depends , But if your going for MSA spec which is advisable ,They specify a minimum of 125mm2 and a minimum of 6mm thickness . Then the bolt hole must be no less than 11/2 the diameter of the bolt away from the edge of the plate . The MSA rules are a bit of a minefield but once you have read them a few times and digested them it s plain sailing .
  13. ciderman
    Ok heres some more , Not a standard 90 chassis I know , But the ideas are the same . All plates and support bearers are from 6mm plate .
  14. ciderman
  15. ciderman
    Damn , The secrets out now Pod .
  16. ciderman
    Arc welders are handy not just for welding but also when cranked right up they also cut very well ,
  17. ciderman
    Thats a different way of saying it , Simply cut to the desired size using a parralel V block and simply superglue both ends together . It can get messy
  18. ciderman
    For one offs i always make my own using O ring cord , Its as cheap as chips . http://www.robeco.co.uk/o_ring_cord.htm
  19. ciderman
    A TV star who has been in the Jungle . Living the dream
  20. ciderman
    Bish dont do trees
  21. ciderman
    Excellent service from them every time , I usualy ring them on a monday or PM Dave on a sunday , Within a short while I get a reply of an action plan and by tuesday the parts are there .
  22. ciderman
    Must of been all those Camel trophy videos you watched when you were younger .
  23. ciderman
    Dont try hammering them in or you will make s**te out of the rubber boot .
  24. ciderman
    We havent got sky . does anyone know if its on Virgin cable ??
  25. ciderman
    Ive got a copy on DVD from Bushboctor AKA Bushy on here from when he and Andy were there in 2005 . Its great listening to his broad Bristol accent on the commentry .
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy

  I accept