northernchris

Cheers AL The tube is CDS 2 45mm x 3.6mm The cage was painted with etch primer then the black is plasti cote satin black, a real P.I.T.A to paint with!!! Chris

Hi I have been really busy the last 2 days. Waht do you all think? Chris

Yep Rog i use the same and yes they are spot on. Chris

ok juels will do,it would be worth giving them a call anyway because they always used to have loads of off cuts around Chris

Hi jules When i was a PILBEAM RACING building a prototype SR2 24hr race car,we used honeycom alloy,this stuff would bend/give enough simler to glass fibre waffle boards but tenth of the weight. Give pilbeam a ring in the morning and have a word.The alloy honeycom combined with course grip tape would do the jog no probs. Chris

Looks like just off the one BEN,if thats the case its not a very well thought out conversion. Chris

Power flow Very poor quality 304 s/s, mig welded poop!!!!!!! the bends are poor also. Primary design are the main people for top of thge range stuff,their stuff IS the very best but at a price. They do incernel,(a type of very light weight s/s) stainless steel. If you want bends i can supply you with whatever you need,i only use 316L which would be best welded with tig and back gassed for max durability. Cost for 90/45 degree bends start from £3.00 - £10.00 1"- 4" dia. Chris

IF you are talking about inverter tig sets yes they are small and no i wouldnt say £150-£200 for a 150amp scratch start tig IS dear? I am also a TIG,MIG,MMA and gas welder! (with £1000,s worth of welders in my own workshop) Chris PS the pic is only of the spool feed for the mig.

Why would T.I.G be better? By the look of moglites truck it has been Migged together anway!!!

Yep i am going to,also doing all 8 rounds. Chris

Yep got home at 1.30am Sorted the wobblerly problem out.............. 1 wheel with about 11mm of run out as good an excuse as any to blag the Mrs so i could get some new wheels!!!!!! Chris

Just wanted to say cheers to SimonPearson for waiting till some daft hour for me to pick up the simexs,your a star mate. Ran the tyres today,all good except they need a little bit of a re-balance Chris

Get me the tyres and i will get you the paint.

Yep cheers for that richard

The 9 in the size means width 9" just wonderd what the tyre height would be?

Does anyone know what the overall diameter a 9.00x16" would be? Chris

I would like a crack at that but i am not finished preping the 90 for this season.

Where would be the best place to get 35/11.50/15 simexs from?????????

Where are you based Dave? I would be interested in coming out playing

winch challenge, trials and general messin around.

As it says,what good clubs are there in northants? Chris

Please look in the Classified Forum. Chris

I ment what lb/inch are they?

I have just been sent some pro comp springs for a customer they are APPARENTLY range rover 35% uprated rears. So does any know what sort of rate these will be? Chris