Jump to content

666 george

Settled In
 View Profile  See their activity

  • Posts

    20

  • Joined

  • Last visited

 Content Type 

Everything posted by 666 george

  1. 666 george
    I'll be banging on the gate at 9. Always been a good show for the last 4 years I've been
  2. 666 george
    I used the TD pipes just cut off the flange and add to the down pipe everbody is useing. But I've been told you can use all the Tdi pipe work(not the down pipe). Mine is on it's way out so I'm going to cut up a disco exhaust and make it fit the 90.
  3. 666 george
    Not far from me. Did it about a month ago and it was bone dry (small puddles). I met up with some of the the boys from landyzone this morning a they did it today, don't know what it was like.
  4. 666 george
    The other is 5/8 UNF (15.87mm)
  5. 666 george
    All i did was put a plate between it. It feels like it spins up a bit easyer and more responsive
  6. 666 george
    I had mine changed over at pirtek, had a different size thread
  7. 666 george
    Is a Disco engine in a TD ?
  8. 666 george
    A 3ft long bit of metal !
  9. 666 george
    I took the casting off the disco and changed it with the defender one ! Easy !
  10. 666 george
    Got mine out with heat and a hammer ! To get it back in it took 10 tons in a press.
  11. 666 george
    Just done mine. 3 days all in, with me helping £380 ! Best money i have spent, it runs alot better. I should have done it a long time ago, it would have saved me sh*t loads on diesel.
  12. 666 george
    Try heating it up. I got mine out with a hammer and a blow torch. A friend of mine took it to work to press it back in and it took 10 tons.
  13. 666 george
    Yes the RRC wheels will fit, i had some on mine but they looked a bit to bling for mine. I have a disco back end so couldn't tell you but i think they will be the same as the front, with the centre cap sticking out. They are a bit of a close fit. Think they are 16", you will have more side wall on them. Wobble wobble Graham
  14. 666 george
    The bloke over the road from me gets office rubber backed ones, just cut to the shape you want. Take them out and hang on the line and they are cheap FREE !
  15. 666 george
    My wife was not happy to start with, kept taking the mickey out of me. I wave to all older landy's, but not the new ones(not real land rover driver's).
  16. 666 george
    http://www.lewis4x4.co.uk/shop.asp?ItemID=...ory=Accessories Don't know what model you have but this is the cheapest place i could find. Graham
  17. 666 george
    Forgot to add. Your snorkal runs up the drives side, mine is on the other side.
  18. 666 george
    I would say it is a 110, the bonnet says 110 and the new one says defender and on the back it is turbo. The 200tdi i think come out on G/H, so you and me look like we have the last of the 110/90 2.5TD
  19. 666 george
    http://www.mailorder4x4.com/acatalog/Onlin...Exterior_7.html Try this one, just got mine but not fitted yet. Looks ok to me
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy

  I accept