Arjan Posted January 7, 2021 Share Posted January 7, 2021 This year, this Ifor Williams trailer found its way into the circus here and so far we're quite happy with it. Ifor Yes, reflections boards were fitted by me as I like them a lot to make the trailers as visible as possible.. Question 1 : The foglight does not seem to be connected to PIN 2 (54G) - is there a special IW wiring thing ? Question 2 : Does anybody know what LED units will a +/- direct swop for these bulb units ? Thanks ! . Quote Link to comment Share on other sites More sharing options...
western Posted January 7, 2021 Share Posted January 7, 2021 Any square LED light should fit, the top right on this site for example https://www.towingandtrailers.com/products/trailer-parts/trailer-lights/rear-trailer-lights/led-rear-lights/3-function-led-lights/ rear fog light is IIRC on a blue wire at pin 2 https://www.westerntowing.co.uk/trailer-caravan-12n-wiring-diagram/ 7 pin trailer wiring is common, shouldn't think Ifor trailers would be any different. Quote Link to comment Share on other sites More sharing options...
L19MUD Posted January 7, 2021 Share Posted January 7, 2021 and if you want to make that fog light LED it looks identical to a Defender one? Quote Link to comment Share on other sites More sharing options...
toenden Posted January 8, 2021 Share Posted January 8, 2021 Hi Arjan, Good idea with the reflection boards, but should they not have been the other way around so trafik from behind gets pointed to the sides around the trailer in a similar way that roadsigns point to the pasning side? (I know, i know, penny pickling, but my ocd flipped 🙂) /mads Quote Link to comment Share on other sites More sharing options...
Arjan Posted January 8, 2021 Author Share Posted January 8, 2021 Idea behind the boards as they are fitted now is that they point sort of outwards - making a flow around the trailer regardless of on what side of the road I drive.... They are seriously visible.. We have put a feed on all 7 pins and the fog light will not come up. It does work when a direct feed is done on the light so I assume a cable problem. So a rewire seems to be on the list of jobs... Many thanks for the link ! Quote Link to comment Share on other sites More sharing options...
elbekko Posted January 8, 2021 Share Posted January 8, 2021 1 hour ago, Arjan said: We have put a feed on all 7 pins and the fog light will not come up. It does work when a direct feed is done on the light so I assume a cable problem. So a rewire seems to be on the list of jobs... It's trailer wiring... of course a rewire is necessary. Quote Link to comment Share on other sites More sharing options...
Blanco Posted January 8, 2021 Share Posted January 8, 2021 Ifor trailers usually have 'proper' junction boxes under the floor, worth checking for them, and just make sure all is well on the inside. Quote Link to comment Share on other sites More sharing options...
Arjan Posted January 8, 2021 Author Share Posted January 8, 2021 Ok - interesting... I'll have a look under the thing.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.